20inch tires/ sprocket combo?

[spartacus]

Im getting 20 inch tires on my 300ex, and I want to keep the gearing to be the same as stock, which runs with 22inch tires. So what sprocket size would give me virtually the same gearing as stock? I dont want to loose any top end once I get the 20s. thanks

[elementryder]

14t is what your are lookin for but i reccomend a 12t

[spartacus]

just keep the stock tooth on the rear?

[Sjorge450R]

Originally posted by spartacus
just keep the stock tooth on the rear?

either 14/38 or 13/36. That will put you at the same ratio as stock with just a tad bit more top end. Dont get a 12t front, you will lose ALL of your top end.

I reccomend the 13/36 combo just because you can run a stock case saver.

[spartacus]

Originally posted by Sjorge300EX
either 14/38 or 13/36. That will put you at the same ratio as stock with just a tad bit more top end. Dont get a 12t front, you will lose ALL of your top end.

I reccomend the 13/36 combo just because you can run a stock case saver.

sounds good bud, thanks.