czrider263
04-29-2006, 11:38 AM
Well after going to Joe Byrds school i had alot of discounts on different parts. I found a part that looked pretty cool and decided to try it. It was the Hardkor taperd baring hubs. Installation went really smooth and i can feel a nice differance. Its a wonderfull product. There is no more dinding in tight turns.
First you have to take off the wheels.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1147a.jpg
Then take off the brakes.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1150a.jpg
Then take off the castle nut and the old hubs.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1154a.jpg
Next take off the brake rotor off the old hub.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1156a.jpg
Then install the dics onto the new hubs.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1204a.jpg
Pack the big baring with grease and put it into the hub.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1219a.jpg
Then install the seal.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1219b.jpg
Install the small baring and put the hub onto the spindel and put the castel nut on and set the baring preload.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1227a.jpg
install the cover
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1232a.jpg
Put the brakes back on.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1242a.jpg
And last put the wheels back on.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1315a.jpg
First you have to take off the wheels.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1147a.jpg
Then take off the brakes.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1150a.jpg
Then take off the castle nut and the old hubs.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1154a.jpg
Next take off the brake rotor off the old hub.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1156a.jpg
Then install the dics onto the new hubs.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1204a.jpg
Pack the big baring with grease and put it into the hub.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1219a.jpg
Then install the seal.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1219b.jpg
Install the small baring and put the hub onto the spindel and put the castel nut on and set the baring preload.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1227a.jpg
install the cover
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1232a.jpg
Put the brakes back on.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1242a.jpg
And last put the wheels back on.
http://i21.photobucket.com/albums/b292/czrider263/hardkor%20hubs%20install/_042906_1315a.jpg