hoe do you put a 350x rear shock on a 300ex?

[330EXman]

ok guys stupid question but i know i have heard of many people putting a rear 350x shock on a 300ex to get the resivoir and compression adjustability and all that for less $$$ but i got my 350x shock right here and it doesnt look like it fits!

the nottom connection where it bolts to the swing arm isnt wide enough to go on the out side of the brackets and its not skinny enough to go on the inside of the brackets

do you have to modify something??

has anyone done this before on here

telll me about it

[TheX1992]

bump

[DEAL]

You need the 350x rear end too.

[Porkchop]

yeah what he said ^

yeah, you need a 350x shock, swingarm, carrrier and axle.

[Porkchop]

actually.... i might be wrong here fella's but all you'd need is the swing arm and shock, your carrier and axle should fit :huh

[countypark]

All you need is 2 spacers to fill the gap where the swingarm mounts to the frame, a 350x swingarm(bare) and a 350x sock. Everything else will swap over from your 300 rear end.

Don't waste your time though.

The ride becomes so stiff that it hurts to ride. The 350X shock has a super strong spring and a really short travel. On the 3 wheeler the angle of the shock is different which makes a big difference in feel. Your stock shock will ride better.

I am trying to locate a rear Raptor shock from an 01. They will bolt right on.

[330EXman]

ok guys i am not going to swap my whole rear end cause im not going to buy all the swing arm stuff an everything i am gonna race nationals nextt year and i need stiff supension but hey you know i have the shock and someone else can buy it from me if they want it but i will just go and buy the good stuff

um ya

if anyone has the whole rear end off a 350x let me know


WHAT IS THIS I HEAR BOUT A STOCK RAPTOR SHOCK FITTING THE 300EX

I LOOKED AT ONE THE OTHER DAY AND MAN ARE THOSE THIGN SKINNY AND THE SHOCKS LOOK SO OUT OF DATE THEY ARE SO SHORT DAMN

WELL LATER GUIYS THANKS FOR THE HELP