Rear clutch nut needed for kasea 90 asap!

[Livin4Real]

Yup, I stripped it >:( I need the thin rear clutch assembly nut that holds the bell on for a kasea 90. The one that sits just inside the clutch cover with the rubber grommet in between it and the outer bearing in the clutch cover. I'll cover overnight shipping if someone has one or two, must be off a kasea seems others won't fit like the eton and dinli :-/


o.d. is 24mm and the i.d. looks like 10mm (maybe 9 with threads, lol) and it's only 6mm thick.
http://img.villagephotos.com/p/2004-4/702601/ZBADO-4-25-06037.jpg
Brian

[bigdaddy]

I have a brand new Polaris one still in the bag. Dont know if its the same, looks like it. Let me know.

[Livin4Real]

anyway you can you throw some calipers on it and check measurements?

[BradLoomis]

They are the same. We have Preds and Kaseas.

[Livin4Real]

Thanks for the tip Brad, I'll check my local guy in the morning on the pred.

I'll let you know Bigdaddy, I've got a couple on the way already from another guy but doesn't hurt to have extras.

Brian