250r rider 88
04-24-2006, 05:26 PM
ok after screwing up my electrical system i have redoen it to were there are not wires or hookups for the lights as well as removed the voltage regulator
its gettign a very good spark will start 1st or second kick but smokes alot and wont stay running at idle i have a esr trx 6 kandn filter with airbox lid on, no snorkle have the hole plugged with the nacs plug, and boyesson rad valve, stock card, needle clip on third position, what main jet and slow jet should i use and i mixed this batch of gas at 3 ounces to 1 gal cause thats what my mechanic who lives threee hours away and cant help me here told me to run in it
any help appreciated would love to here fomr people who have the same or similar setup as me on their jetting
thanks again
its gettign a very good spark will start 1st or second kick but smokes alot and wont stay running at idle i have a esr trx 6 kandn filter with airbox lid on, no snorkle have the hole plugged with the nacs plug, and boyesson rad valve, stock card, needle clip on third position, what main jet and slow jet should i use and i mixed this batch of gas at 3 ounces to 1 gal cause thats what my mechanic who lives threee hours away and cant help me here told me to run in it
any help appreciated would love to here fomr people who have the same or similar setup as me on their jetting
thanks again