PDA

View Full Version : KBR/Venom LT-R 450



kgbg
04-23-2006, 09:43 PM
Bone stock a LT-R pulls only 32 and 23 on my dyno. This is brand spanking new 100% stock, lid on,l plug in pipe. This is a pretty low number and the lowest of all 3 450 in bone stock on my dyno. Removing the sparky pipe plug alone gets you 35 and 25. Lid off with plug still out is 40 and 27. Cherry Bomb adds almost 1 hp and almost 1 ft lb.
We added:
Venom Port/Polish/Combustion Chamber Work
Venom 13.75:1 CP piston
KBR air boox delete/filter kit
Yoshimura Full Pipe
Trinity Fuel Controller (will not run with trinity controller, exltremely rich. Trinity says some of the boxes got a "bad map" and asked me to send it back for a re map).
Cherry Bomb (cleaned the AFR right up)
This engine needs cams to set the band a bit higher, IMO. I like them to rev a bit more. I have a set being made.
Before and after
100% bone stock to the above list of mods.

chad502ex
04-24-2006, 10:43 AM
good work.

58% increase in hp and 45% increase in torque all on stock bore/stroke.

rockman
06-06-2006, 03:32 PM
now thats a powerband:eek2: