PDA

View Full Version : A Bit of Carnage



xlastshotx
04-18-2006, 10:28 PM
This is what happend to my Banshee after I rolled it 20+ times down a very steep rocky hill last week, Tell me what you think.
Torn Seat Cover
http://www.temeculamustang.com/banshee/1.jpg

Broken Rock Protector and Glass
http://www.temeculamustang.com/banshee/2.jpg

Broken Plastic on Light

http://www.temeculamustang.com/banshee/3.jpg

Very Bent Grab Bar
http://www.temeculamustang.com/banshee/4.jpg

Cracked, Scratched, and Broken Rear Plastic
http://www.temeculamustang.com/banshee/5.jpg

Slightly Tweeked Frame
http://www.temeculamustang.com/banshee/7.jpg

Bent Rear Axle
http://www.temeculamustang.com/banshee/8.jpg

This is How My Banshee Looks Rite Now (After I Painted the Frame and Took Off Most of The Broken Parts)
http://www.temeculamustang.com/banshee/6.jpg

And the Other Side
http://www.temeculamustang.com/banshee/9.jpg

All the plastics are broken as well and the part on the steering stem were the tie rods hook up to is bent also, I couldn't get a good picture of any of those. I Will get a picture of the hill i rolled down soon.

Mxjunkie
04-21-2006, 08:17 AM
Damn man, no more hill shooting every roll cost 100 bucks haha

jimmy123_272
05-12-2006, 09:46 AM
that could have been an exiting ride down the hill

Z-Rider86
05-16-2006, 10:18 AM
Bummer man looded like a nice ride. Oh well now you have no choice but to rebuild and make it even sweeter.

xlastshotx
06-11-2006, 05:49 PM
Well now the grand total is up to 3,000 dollars... So what is that now about $150 dollars per roll. Its almost finished it should be done this Wednesday. But now it looks like I have to get a new front left rim, It is bent pretty bad. Rite now my friend is fixing the banshee up. He had to send it to a frame guy and get the rear of the frame straightened, soon after we found out that the front of the frame was bent as well and the things that hold the steering stem were bent all the way to the gas tank. Luckily he was able to fix all that. All the parts have been installed. He is now just going over the electrical to get the headlights to work and to re-wire it so that it doesn't need a key. I am going to have to get some inexpensive front shocks, the stock ones are to soft with the +2 a-arms. As soon as it gets finished and I get it back I will post some Pics of it!

bansheexcracer2
06-12-2006, 11:31 PM
That green paint is bad ***. A guy i kno wrolled his yfz down a 40 rocky cliff and it didnt **** it up that bad.

xlastshotx
06-14-2006, 10:48 PM
Thanks, Yeah idk I guess the way my banshee rolled was pretty much as bad as you can roll a banshee.. I am just glad the engine is fine.

xlastshotx
06-19-2006, 12:12 AM
YES! My Banshee finally came back today; Here are the pictures I took today, they are kind of low quality and the frame color is diffewrent in these pictures than it really looks, because I took them in the dark, tomorrow in the daylight I will take some better pictures. Yes I do know one of the shock covers is upside down. The Banshee is about 90% complete. So tell me what you think of it so far!

<br>
<a href="http://www.temeculamustang.com/atv/b1.JPG"><img src="http://www.temeculamustang.com/atv/b1.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/b2.JPG"><img src="http://www.temeculamustang.com/atv/b2.JPG"WIDTH=600 HEIGHT=800 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/b3.JPG"><img src="http://www.temeculamustang.com/atv/b3.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/b4.JPG"><img src="http://www.temeculamustang.com/atv/b4.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/b5.JPG"><img src="http://www.temeculamustang.com/atv/b5.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/b6.JPG"><img src="http://www.temeculamustang.com/atv/b6.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/b7.JPG"><img src="http://www.temeculamustang.com/atv/b7.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/b8.JPG"><img src="http://www.temeculamustang.com/atv/b8.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/b9.JPG"><img src="http://www.temeculamustang.com/atv/b9.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/b10.JPG"><img src="http://www.temeculamustang.com/atv/b10.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/b11.JPG"><img src="http://www.temeculamustang.com/atv/b11.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/b12.JPG"><img src="http://www.temeculamustang.com/atv/b12.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

banshee84
06-19-2006, 09:03 AM
That's a sick banshee, defintily take some pics during the day

xlastshotx
06-19-2006, 03:14 PM
Ok, Here are some daytime Pictures.

<br>
<a href="http://www.temeculamustang.com/atv/sd1.JPG"><img src="http://www.temeculamustang.com/atv/sd1.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/sd2.JPG"><img src="http://www.temeculamustang.com/atv/sd2.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/sd3.JPG"><img src="http://www.temeculamustang.com/atv/sd3.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/sd4.JPG"><img src="http://www.temeculamustang.com/atv/sd4.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/sd5.JPG"><img src="http://www.temeculamustang.com/atv/sd5.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/sd6.JPG"><img src="http://www.temeculamustang.com/atv/sd6.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/sd7.JPG"><img src="http://www.temeculamustang.com/atv/sd7.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/sd8.JPG"><img src="http://www.temeculamustang.com/atv/sd8.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/sd9.JPG"><img src="http://www.temeculamustang.com/atv/sd9.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/sd10.JPG"><img src="http://www.temeculamustang.com/atv/sd10.JPG"WIDTH=600 HEIGHT=800 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/sd11.JPG"><img src="http://www.temeculamustang.com/atv/sd11.JPG"WIDTH=600 HEIGHT=800 border="1"></a>
<br>

I am getting the last couple of parts this week. I am ordered some "Works Shocks, AT Steeler Front Shocks". Those should come by the end of the week. Rite now I have stock Banshee front shocks and they are to soft with the 2+1 A-arms.. The A-Arms are great, nothing like having a 1989 Banshee with A-Arms instead of J-Arms. Tomorrow I am getting a new front left rim, the one on there rite now is bent. Also I really done like how the spindles are red... It looked good when my plastics were red but now I don't really think it goes to well, so as soon as I get the chance I am gunna change them to Black. Other than those couple of things everything is great! Tell me what you think about my banshee!

250r4life
06-19-2006, 03:50 PM
i cant beleive with all the money you have into that thing that you still have stock pipes....

xlastshotx
06-19-2006, 04:41 PM
hahaha yeah, I wish I had the spare money to get some new pipes and silencers, but sadly I could only get things to replace parts that were broken... and the exhaust and silencers were not broken haha. I am going to start saving now for a pipe and silencer combo that will be the next thing to do, but that will be a little ways off.


Heres a few more pictures of my Banshee out on the trails, I had to give it a test run today.
<br>
<a href="http://www.temeculamustang.com/atv/mt1.JPG"><img src="http://www.temeculamustang.com/atv/mt1.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/mt2.JPG"><img src="http://www.temeculamustang.com/atv/mt2.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

<br>
<a href="http://www.temeculamustang.com/atv/mt3.JPG"><img src="http://www.temeculamustang.com/atv/mt3.JPG"WIDTH=800 HEIGHT=600 border="1"></a>
<br>

banshee84
06-19-2006, 08:27 PM
Nice banshee

AR15 guy
06-19-2006, 11:04 PM
How much was the total to fix it? I probably would have bought another one and swapped some parts around lol.

TRX23rider
06-20-2006, 11:22 AM
lookin really good

xlastshotx
06-20-2006, 02:51 PM
Thanks, Yeah I could have bought another used banshee with all the money i spent... Its somewere around 3 grand. But my Banshee is way better than a stock one would be.

LOUDONE
06-21-2006, 09:22 AM
Nice so far, but get rid of those stock pipes! Buy yourself some DMC Aliens... You will not be disappointed.

250r4life
06-21-2006, 02:44 PM
thats the 1st time ive ever seen somebody reccomend the DMCs... i dont know if i've ever seen them on a bike either... they dont look too much different from the t-5s.... they work pretty good for you huh? i knew they were pretty good for blasters, but to be honest i didnnt even know they made them for banshees... how are they in price comparison?

hondaboy400ex55
07-13-2006, 07:07 PM
my buddy has the dmc pipes and the 2 into 1 silncer and man his banshee is tricked that thing scared me when i road it

but yea he loves them so i know they really good pipes