Parting Out Mx Ready 440ex

[hondaracer263]

I have every part that u need for your 400ex. I will get a list on here tomorrow but just shoot me a pm or e-mail about your parts that you need. I need to get rit of this stuff asap. If you have any questions please call my cell phone at 814-323-0927 thanks jon


Here is just a few parts.

1 Frame powder coated red with skid plate, has no cracks in the frame. $500 obo

2 Stock subframe modified a little bit with the battery box and tabs cut off, because the battery was under the hood. $75 obo

3 Motor 440ex kit big bore $900 obo

4 Magura hydralic clutch used 3 times $70 obo

5 swingarm is a JB racing +1.25in it is about 1 year old and is being sold with the bearing carrier. The bearing carrier is lonestar racing bearing carrier $650 obo

6 Atv-four-play a-arms powder coating just got redone 4 races ago, it is black. Included with the a-arms is the front spindles, the front brake rotors, and the the tie-rods. They also have heim joints on the a-arms $500 obo

7 RPM dominator axle that is adjustable between standard width plus 2 or plus 4 widths $200 obo

8 Derisi front shocks with resivors with the adjustable clickers on the resivors $600 obo


Pictures are available upon reqest if you have any questions pm me or contact my cell phone at 814-323-0927 thanks jon

[cbr600ex]

Do you have the motor? If so how much do you want for it? and does it work fine? What year bike is it?
Please PM me back. I tryed to pm you but your pm box was full

[#8red]

I'm looking for tires/rims lmk what ya' have / size & price - thanks

[mprtt426]

whats the parts list

[johnsls]

Your PM if full.

Let me know how much for the following (if you have them)
and also shipping to NJ-08807

1) Front brake lever/master cylinder (I really only need the cap and 2 screws)

2) Lower right a-arm (mine has a cracked boot)

Pic if you can

[sideways400]

im looking for the whole suspension package....arms,shocks,axle

[hondaracer263]

parts list is updated just for the moment getting more parts off everyday

[pit/wood]

I wll take the magura clutch, pm me with your address,or I can give you a call. Thanks

[#8red]

if he^^^doesn't buy that clutch - I'll buy for sure - LMK if still for sale

[abc]

i want the throttle...my pm box doesnt work so email me at theprez25@gmail.com

[racingquads22]

starter sylinoid? 10 bucks shipped?

[killed300ex]

You have an oil tank?
Evan

[exrider008]

CLEAN OUT UR PM BOX

trade you a pocket bike for your a-arms.

this is a tornado 49 cc pocket bike.

2 stroke
49cc
air cooled
kinda loud
dell'orto carb
race shocks
race tires
pull start
30:1 mixing ratio
stainles steel frame
holds 1 liter gas tank (go 15 miles on that little amount)
about 50lbs
weight cap 280lb
runs perfect
5.5hp
up to 45mph


lil more info

has no muffler which adds power. i raced against a nuther tornado bike and mine pulled much better and was faster.

the body has a crack in the rear.

i run pedal bike pegs as foot pegs sinse the cheeply made ones didnt hold up.

folding pegs on the rear axle so yo can flip em up and ride wheelies. i wouldnt trust em though.

spark plug whire might be getting bad or the blug because some times ill ride a wheelie and when the front slaps back down on the ground ill snub some times. then i giggle the spark plug whire around and put the choke on and it starts right up.
you need to use the chock usualy to start it up.

getdrunk1990@yahoo.com


the body/rims and swing arme are now black. frame is polished steal not red

getdrunk1990@yahoo.com

[400ex2989]

Originally posted by hondaracer263
I have every part that u need for your 400ex. I will get a list on here tomorrow but just shoot me a pm or e-mail about your parts that you need. I need to get rit of this stuff asap. If you have any questions please call my cell phone at 814-323-0927 thanks jon


Here is just a few parts.

1 Frame powder coated red with skid plate, has no cracks in the frame. $500 obo

2 Stock subframe modified a little bit with the battery box and tabs cut off, because the battery was under the hood. $75 obo

3 Motor 440ex kit big bore $900 obo

4 Magura hydralic clutch used 3 times $70 obo

5 swingarm is a JB racing +1.25in it is about 1 year old and is being sold with the bearing carrier. The bearing carrier is lonestar racing bearing carrier $650 obo

6 Atv-four-play a-arms powder coating just got redone 4 races ago, it is black. Included with the a-arms is the front spindles, the front brake rotors, and the the tie-rods. They also have heim joints on the a-arms $500 obo

7 RPM dominator axle that is adjustable between standard width plus 2 or plus 4 widths $200 obo

8 Derisi front shocks with resivors with the adjustable clickers on the resivors $600 obo


Pictures are available upon reqest if you have any questions pm me or contact my cell phone at 814-323-0927 thanks jon if its not to late i will take the hydrolic clutch

[mprtt426]

do you still have the motor?does it come with the carb?

[exrider008]

can i get pics of the bearing carrier (ur pm box is full)

[luvmyex]

go ahead and get a pic of the axle while your at it ;)

[pit/wood]

I have to back out on the clutch,plans changed. sorry

[spent21]

do you have a steering stem?

[#8red]

dibbs on clutch - pm me & I'll send $$$ or paypall - let me know - I'll take it!!

[Brad77]

I tried to pm you but your box is full.

[hondaracer263]

will clean out pm box today sry

[supafasst426ex]

i would like to see a pic of the axle please.

[LeGaCyGiAnT124]

Originally posted by supafasst426ex
i would like to see a pic of the axle please.

i already got dibs on the axle, called him on the phone any my cousins going to pick it up

[trost66]

What rear shock do you have

[416HiRoller]

I need a wiring harness and a voltage regulator if you got em', just let me know how much you want for them.

[johnsls]

Your pm box is full again..

What about:
Magura hydralic clutch used 3 times $70 obo
and possible the starter?? (I think mine is bad, acting like crap)

pm me back...
John

[Chino886]

are the derisi shocks ST or LT? Details and pics?

[set2crash67]

you pm box is full. how much do you want for the swing arm with out the carrier?

[oldfartracer]

exrider008 tried to PM you your box is full!!

[quader400]

if you still have the magura send me a pm and ill take it off your hands imediatly. let me know thanks

[culookn]

would you sell just the skid? do you still have all of the hardware for it. any idea if it would fit a 450r?