dsaint77
04-16-2006, 09:01 PM
Well my banshee is not running right. I have plenty of top end power but it dosent seem to want to rev out like it should. I also have a honda 250r and when you hit the gas on that is tachs out fine but the banshee does not.
As far as a list of mods, its bored out to 370, has trinity stage IV single carb with toomey T-5's. im running yamalube 32:1 in it and the sparkplugs are a nice tan color. I am running CEL needle on the second clip from the top 52 pilot and 168 main jet. I use BR8ES plugs.
It has no trouble starting and usually starts on the first kick.
I am running the airbox with K&N filter - there are 6 3/4 inch holes drilled in the airbox that I dont like but that shouldnt be an issue.
Any help would be apprecited.
Adam
As far as a list of mods, its bored out to 370, has trinity stage IV single carb with toomey T-5's. im running yamalube 32:1 in it and the sparkplugs are a nice tan color. I am running CEL needle on the second clip from the top 52 pilot and 168 main jet. I use BR8ES plugs.
It has no trouble starting and usually starts on the first kick.
I am running the airbox with K&N filter - there are 6 3/4 inch holes drilled in the airbox that I dont like but that shouldnt be an issue.
Any help would be apprecited.
Adam