trailmaster
04-14-2006, 06:44 PM
This was my project quad thats almost finished. Im running out of time and need to make room for my 250r next weekend... so its got to go.
To start with, its an 01 Bear Tracker with an 02 Bear Tracker engine. When I bought this quad, the top end was blown. So instead of just rebuilding the top end, I found a complete 02 engine that ran with no problems.. so I bought it and installed it.
Before I installed the newer engine, I took the Bear Tracker all the way down to the frame and cleaned everything. The frame is in very good shape with no rust at all. Infact, very little scratches anywhere. I checked everything on this quad.. from bearings to seals, to new bolts, screws, washers..ect.
The plastic on this quad when I bought it had bedliner sprayed on it. I did not like it so I pealed it off... came off rather easy.. like tape. The plastic underneath is in good shape with your typical scratches and there is a small inch crack at the very bottom. Hard to even tell its there.
Anyways, I ended up installing the engine the other night and fired it up today. Started right away with no smoke. Carb. has also been cleaned. However, the battery is dead so this will need replaced. I rode it around the yard and everything was perfect. Only thing it could use is a set of new tires and rear rims.. but dont need them right away.
This quad only needs a few things to be complete. I dont have time and need the room for my new quad.
Make an offer.. Need Cash! I can get some pics if anyone is interested. I have pics of the rebuild from the frame up also.
To start with, its an 01 Bear Tracker with an 02 Bear Tracker engine. When I bought this quad, the top end was blown. So instead of just rebuilding the top end, I found a complete 02 engine that ran with no problems.. so I bought it and installed it.
Before I installed the newer engine, I took the Bear Tracker all the way down to the frame and cleaned everything. The frame is in very good shape with no rust at all. Infact, very little scratches anywhere. I checked everything on this quad.. from bearings to seals, to new bolts, screws, washers..ect.
The plastic on this quad when I bought it had bedliner sprayed on it. I did not like it so I pealed it off... came off rather easy.. like tape. The plastic underneath is in good shape with your typical scratches and there is a small inch crack at the very bottom. Hard to even tell its there.
Anyways, I ended up installing the engine the other night and fired it up today. Started right away with no smoke. Carb. has also been cleaned. However, the battery is dead so this will need replaced. I rode it around the yard and everything was perfect. Only thing it could use is a set of new tires and rear rims.. but dont need them right away.
This quad only needs a few things to be complete. I dont have time and need the room for my new quad.
Make an offer.. Need Cash! I can get some pics if anyone is interested. I have pics of the rebuild from the frame up also.