dual stock oil coolers?

[abuckley1290]

Has anyone ever done this? Does it give a noticable decrease in temperature? It would look something like this:

[theTman]

i think ive seen it done...i have one for sale btw

[jeremy_283]

good luck! look at the oil line connection figure it all out and how it will hook up cuz i've dun my research before and i dont think it will work

[abuckley1290]

Originally posted by extremejrowe
good luck! look at the oil line connection figure it all out and how it will hook up cuz i've dun my research before and i dont think it will work

jw how come you dont think it will work?

[jeremy_283]

oil cooler to oil cooler line they dont have the same fittings................ its a unique oil cooler fitting on both ends ............ i looked into it one night and just dont think it will work ........... u just have to think of how it will piece together and then u will see wat i mean........ go look at your quads oil line how u gunna get a line to run from oil cooler to oil cooler?

[abuckley1290]

good point...i did a search and found an old post that they did it, check it out: dual (http://www.exriders.com/vbb/showthread.php?s=&threadid=85290&highlight=dual)

[Iliketogofast]

Won't that kill oil pressure?

Also, why don't you just buy an oversized one??

[2004exrider]

Most of the time when people hook up two oil coolers they dont put them in line with eachother. They will take the 2nd cooler and tap into the head to have cooler oil go to the cam and valves.

Jimmy

[abuckley1290]

Originally posted by 2004exrider
Most of the time when people hook up two oil coolers they dont put them in line with eachother. They will take the 2nd cooler and tap into the head to have cooler oil go to the cam and valves.

Jimmy

Yea i was going to do that but i really dont want to tap into the engine like that..

[premiumtommy]

you could just new fittings from the parts store and do it however you wanted to without the restrictions of the stock lines

[Iliketogofast]

Originally posted by 2004exrider
Most of the time when people hook up two oil coolers they dont put them in line with eachother. They will take the 2nd cooler and tap into the head to have cooler oil go to the cam and valves.

Jimmy

This is a more efficient idea.

[eganracing]

Originally posted by Iliketogofast
Won't that kill oil pressure?

Also, why don't you just buy an oversized one??

yeah i always thought it wouldnt work because u wouldnt have enough pressure

[premiumtommy]

i doubt you would lose much pressure..

how much oil does the cooler hold?just the cooler?

and if they arent worried about pressure on an oversized kit, then you shouldnt be

[abuckley1290]

sounds good but does anyone know if it will help keep temps down?