PDA

View Full Version : Informatoin on servicing a trx450



rooster40
04-12-2006, 09:49 AM
Helpful guide lines & tipes on servicing my honda

04-12-2006, 09:55 AM
here is your first helpful tip....

buy a service manual

04-12-2006, 10:45 AM
be specific...i did a how to article w/ pictures how to change your oil

fatkid400
04-12-2006, 07:15 PM
go to the frequently asked ?'s forum, I think its in there.

honduh440
04-13-2006, 02:03 AM
drain all the oil, put the plug back in, then start it up so it can get warm for about ooooh say 5 minutes then fill it up with oil

04-13-2006, 07:59 AM
Originally posted by honduh440
drain all the oil, put the plug back in, then start it up so it can get warm for about ooooh say 5 minutes then fill it up with oil so u dont know it has an oil filter?:rolleyes:

BLEEDRED
04-13-2006, 09:39 AM
so u dont know it has an oil filter?

He's being a prick. He said to drain the oil and then start the bike and then add oil in 5 min.

honduh440...spare us. If you don't have good information don't post.

Service manual is a great idea. Change the oil on both the engine and transmission side often. Keep your air filter clean and oiled. Frequent checks for lose bolts and what not. Keep the chain lubed up. Good luck.

OKTRX450R
04-13-2006, 08:14 PM
Originally posted by rooster40
Helpful guide lines & tipes on servicing my honda

Rooster I did a few writeups on my website...click on the link in my sig and then click on "TRX450R How To Guides"...hope this helps...

04-14-2006, 10:03 AM
Originally posted by OKTRX450R
Rooster I did a few writeups on my website...click on the link in my sig and then click on "TRX450R How To Guides"...hope this helps...

i used your piston/cam install instructions.
you did a good job with your write-ups.
thank you for sharing that information with everyone!!

i will soon be performing your clutch mod for the 450r.

OKTRX450R
04-14-2006, 04:35 PM
Originally posted by force
i used your piston/cam install instructions.
you did a good job with your write-ups.
thank you for sharing that information with everyone!!

i will soon be performing your clutch mod for the 450r.

Thank you!

Please, if you find any incorrect information in any of the write-ups please let me know...after reading each of them 20 times before posting I start getting dizzy!!!:D

Also, if there is anything else you are looking for a write-up let me know...thanks again.