Rossier jetting

[epicjr77]

WHat are you guys running for jets? I was told to get a hrc pilot jet but what size main jet?

[Pappy]

on my 04, a 168 main is working great with a hrc lid

[DJJ450r]

I'm running 190 main and 50 pilot with hrc lid.

[Quadster450]

i run a 160 main, 45 pilot, crf 450 needle 4th position with ehs racing lid - i'm about 2800 feet altitude

[compedge]

Im in Mass. 185main, 48 pilot, hrc neddle 4th clip, cut lid, k&n filter

[Jonas]

What year model do you have?

[Nick110]

They told me on my 06 to run a 48 pilot 160 main 4th clip on crf needle, and the lid off.

[Chew Spit]

I know this thread is old, figure itd be better to post here, than start a new thread on the same subject...

anyway...

My bike is an 05

Rossier pipe, K&N filter... 300 feet at my house... i ride in the dunes at the coast so anywhere from 0 to 500feet i would guess...

The instructions that came with the pipe say a 205 main jet!? Stock needle in 3rd clip position fuel screw out 2 turns, and stock pilot jet

my Dyno Jet kit came with jets ranging from 104 to 180...

any feedback?.. thx

[400exrider707]

Originally posted by Chew Spit
I know this thread is old, figure itd be better to post here, than start a new thread on the same subject...

anyway...

My bike is an 05

Rossier pipe, K&N filter... 300 feet at my house... i ride in the dunes at the coast so anywhere from 0 to 500feet i would guess...

The instructions that came with the pipe say a 205 main jet!? Stock needle in 3rd clip position fuel screw out 2 turns, and stock pilot jet

my Dyno Jet kit came with jets ranging from 104 to 180...

any feedback?.. thx

I sent you a PM with some good info.;)