clutch perch and lever with hot start

[lil_billy_300ex]

i have to rip out my head light for races this year and i want to clean up the handlebars a little bit since i dont have lights anymore, i was lookin for a clutch perch and lever with a hot start lever, but the ones i found were 160 bucks:eek: is there any other cheaper brands or any other ways to do this. thanks

[DJJ450r]

asv inventions

[JRP]

asv for sure.

[lil_billy_300ex]

i seen those, but those are mounted on the brake perch arnt they?

[450r51]

gen-x-atv sells them with the hotstart

works great and u can use all the stock wires.

[DJJ450r]

Originally posted by lil_billy_300ex
i seen those, but those are mounted on the brake perch arnt they?

They have front brake levers and clutch perch/levers

[lil_billy_300ex]

those generation x ones are nice but i kinda like the stock location. but it might be my next buy, i no the CRFs 450r and CRF 250r ones wont work, this needs to be made for stock 450r perch or universal

[bigz-71]

i have the works and would recommend going ahead and spending the extra money. it is very nice and i have the hot start in the stock location. i did have to buy a cable that would work with the lever but it was not that bad. i think i only paid 120 bucks for my lever and i am sure you do not want to pay that but i just wanted to let you know what i had.

[mike nash]

MSR or Longhorn. Rocky mountain both below 40.00. I have MSR it's great. And I don't like cheap stuff!

Sorry just noticed your keeping stock cable,I race I left mine alone jmo. Good luck.

[bpimpdaddy21]

Originally posted by lil_billy_300ex
those generation x ones are nice but i kinda like the stock location. but it might be my next buy, i no the CRFs 450r and CRF 250r ones wont work, this needs to be made for stock 450r perch or universal

You can use the stock cable with the ASV hotstart. You just need to think about it a little. I took the rubber boot off the stock cable, put the little metal piece from the boot onto the metal piece on the cable, then took a stock clutch adjuster, put it into the hotstart housing with the cable, and then I had to put some tape on the end of the cable, but it worked perfect. I'll try to put a pic up later so you can see.....

[sweet lou]

http://www.powersportsnetwork.com/accessoriesdetail/product=228865/levelcode=13070/catalog=2184/Moose+Equipment+Guide/ULTIMATE+CLUTCH+LEVER+SYSTEM/accessories228865.htm very good!i got this one with out hot start because i got the Er but the lever is very well done!

[lil_billy_300ex]

now that i like and the price is pretty sweet too. thanks, i will order one next week.