PDA

View Full Version : my mistake


smitht316
04-10-2006, 10:35 PM
i was removing the timing chain from a 400ex and the oil pump sprocket was in the way. well at the time it looked like the sprocket didnt come off. after inspecting i realized that it slid right off but not until i removed two bolts from the oil pump. does anyone know the torque spec for the oil pump so i can re-install the bolts correctly
JOEX
04-11-2006, 01:35 PM
Originally posted by smitht316
i was removing the timing chain from a 400ex and the oil pump sprocket was in the way. well at the time it looked like the sprocket didnt come off. after inspecting i realized that it slid right off but not until i removed two bolts from the oil pump. does anyone know the torque spec for the oil pump so i can re-install the bolts correctly
FYI> the How To section is for posts on how to perforam a task not for asking questions;)


Torque spec for the oil pump bolts is 115 in-lbs (not ft-lbs)