PDA

View Full Version : Pro's and con's of the 1988 banshee?



bigbuck90
04-10-2006, 04:47 PM
I found a 1988 banshee near my area and i was wondering what the.What the pro's and con's are of 1988 banshee?Is worth my time and money(1800 bucks)?How is the susiension also is it the 8.7 in of travel up front and back or is it the,9.1 in of front tavel and 8.7 in of travel in the back?Also how are the frames are there any weak spots?Also can i do mods to it to make it like the newer ones?thanks.

crazyfastlt250r
04-10-2006, 04:52 PM
yeah man go for it. you can do any mod to them the same as the newer ones. the only diff i think is that they have j-arms in the front but im not sure

bozz
04-10-2006, 04:57 PM
yea' the j- arms are real weak. And the chain adj is always stripping out or falling off all together' on the older one's but the motor is about identical to the new ones i say offer him 1500 and take it.

enquadrider16
04-11-2006, 01:06 AM
i thought j arms only came on the 87?

xlastshotx
04-11-2006, 01:53 AM
Yeah I am pretty shure the J-Arms were from 87 to 90 or 91 I have an 89 and it has been great, the j-arms arnt bad but there are plenty of suspension upgrades to fix that.

bigbuck90
04-11-2006, 06:14 AM
What do i need to do to put A arms on it,and how much will it cost?

xlastshotx
04-11-2006, 02:47 PM
Well I have been looking at a-arm prices for a wile and it seems to me that you can get a-arms anywhere from about $550 to over $1000... I personally really like the I-Shock A-Arms because they have kits that come complete with everything you could need. Specialty tools, an instructional video, The Upper and Lower A-Arms, New Stainless Steal Brake lines, Brake line Clamps, Lifetime Warranty, and Depending on the kit It could Include a very good set of Shocks made by them but obviously adding shocks will cost a bit more. Here is a link to there web site.

>Link< (http://www.hydrodynamicsusa.com/)

terboed
04-13-2006, 01:16 PM
j-arms are not too bad. the uppers dont carry much force anyway. they had em from 87-90. the only thing about buying any quad that old is that your gonna what to go through the thing and check/replace all the bushings and bearings. while the front suspension uses nylon bushings (cheap) rear linkage, swingarm, and axle carrier bearings must be looked into. this goes for all atv/dirtbikes that are rounding the 20 year mark.