PDA

View Full Version : ChainSlider?


250-R-250
04-09-2006, 10:26 PM
Hey,

Just got my JB swingarm, and I was wondering what I should do for a chainslider? I know the chain is a very important part of the quad, and I would like to do all I can to keep it from coming off and damaging my future motor!

Whats the best option? I have heard of people using banshee sliders!

Let me know what you think I should do
Its getting a new powdercoat, the swingarm itself is new
Here is a pic of it
http://usera.imagecave.com/Kane/DSCF0745.JPG :p
250R-Dee
04-09-2006, 11:26 PM
I used an aftermarket slider for a 250R on my Lonestar swingarm. I had to trim it a little to make it fit correctly.

I'll post a pic later.
hondardr4life
04-10-2006, 04:22 AM
I've got that same swingarm on mine. The banshee slider bolts up perfectly. I have a plastic one on mine, but if you can afford it, get a metal one.
EXtreme-
04-10-2006, 05:12 AM
jody designs those to use the banshee slider. plastic stock slider lasts for years and slides right in.
250-R-250
04-10-2006, 05:41 AM
Awsome, so does anyone have any experience with this swinger? Any problem areas? What about perfermance.
250-R-250
04-10-2006, 02:50 PM
If its not too much trouble, could someone post a link or pic of what kind of slider I should be looking for?
hondardr4life
04-10-2006, 06:50 PM
I have no issues with the swinger at all. Jody makes very good stuff. I don't have any pics of the slider. Just go to your local Yamaha dealer and tell them you want a stock banshee chain slider.
Rich250RRacer
04-10-2006, 07:31 PM
I may be reading this wrong but I think he's looking for the slider, which wraps around the front of the arm. A Banshee part will NOT work here. A Banshee chain GUIDE goes on the mounting bracket towards the rear of the arm.
EXtreme-
04-11-2006, 05:12 AM
the front slider over the pivot bolt takes the stock R style...notice the hole. Otherwise, he needs the banshee slider to mount into the specially designed bracket for the rear sprocket that the pic shows two bolts thru it. It's a JB signature item on all his swingers. I have one on my 416....it's first class.
Rich250RRacer
04-11-2006, 01:58 PM
JB must have copied it, both my Laeger and Lonestar arm have the bracket for the Banshee chain guide.
EXtreme-
04-11-2006, 02:22 PM
no doubt. every swinger should have one of those. you can put her to the rug and still have piece of mind that the chain won't come flying off :eek2: