New hot cam, hard starting?

[Houser450]

just put in a hot cam stage 2 and checked the clearances all looked within spec, but since i put it in quad is hard to start do i need to rejet adjust airscrew richer or leaner if so?

[Houser450]

also have hmf full exhaust, kandn filter, and is an 06 with electric starter any help appreciated

[biff440ex]

You will need to rejet because i am sure its now running lean.

[aviator4]

Can you describe the hard starting problem a little better? A little more info would be good to help diagnose.

[Houser450]

the starter turns the motor over and kinda builds up momentum to start giving it gas doesnt seem to help i have a 48 pilot also

[zeppelin]

Originally posted by biff440ex
You will need to rejet because i am sure its now running lean.
i dont know, i have actualy had to lean out jetting before after cam swaps, this might help a little http://www.exriders.com/vbb/showthread.php?s=&threadid=221872

[400exrider707]

Try 50 pilot, and what clip is your needle on?

[Houser450]

ive got the stock needle and you cant adjust it no clip positions on the stock 06 needle, anyone no a good needle