PDA

View Full Version : metal chip on filter



brokside
03-29-2006, 07:46 PM
i found some small metal chip on my oil filter today!!!
what can it be??? is it normal??
i have an 05 and change my oil every 10hrs...

03-29-2006, 07:57 PM
I'm not sure but from what I've read it is probably a crank bearing going bad.

awj8074
03-30-2006, 01:43 PM
Originally posted by TRX450R_Racer
I'm not sure but from what I've read it is probably a crank bearing going bad. that happend to me but i never saw any thing on the filter it just started making the worst noise ive ever heard. Is it still covered by the warranty? They fixed mine for free. Got a whole new motor out of it.

ThumPIN_450R
03-30-2006, 06:32 PM
Probably the lower rod bearing. I've had mine go twice, the first time I noticed nothing but the most recent time there were a few metal shavings in the filter before it went. if it's under warrantee run that thing until it blows you'll get more free stuff that way. If it's not I would recommend pulling it apart now and save you're self some money and headache.

brokside
03-30-2006, 06:50 PM
i wonder what's causing the faillure and if they gone fix it with the exact same part ,hope my dealer can find better design bearing or crank

03-30-2006, 07:57 PM
they ordered a cheaper bearing for a cheaper price and thought it would hold up, not like honda BUT they are warrantying them and it does indeed sound like what is happening to yours. They usually go out within the first 15 hours of ride time and you will usually see metal on the oil filter right before they go out.

brokside
03-31-2006, 10:50 AM
i have my R for over a year and a half now
still can't figure it out:grr: it's giong to the dealer next wendsday
i want to know the reason of this and the real solution to it
i'm calling honda canada today

ranger400ex1994
04-01-2006, 02:06 PM
how worried should i be? I just bought a left over 05 about 2 months ago and probably only have 5 hrs on it. i will be pissed if the crank bearing goes out when it is out of warrenty

04-01-2006, 04:25 PM
Originally posted by ranger400ex1994
how worried should i be? I just bought a left over 05 about 2 months ago and probably only have 5 hrs on it. i will be pissed if the crank bearing goes out when it is out of warrenty ride it more often. when it goes out it goes out like I said pretty quickly

awj8074
04-01-2006, 10:34 PM
Originally posted by MixMasterMike
ride it more often. when it goes out it goes out like I said pretty quickly i had over 50 hours on my 05 before it went.

04-02-2006, 12:05 AM
Originally posted by awj8074
i had over 50 hours on my 05 before it went. yikes. ive only heard of that about one other time. u must not ride very hard

awj8074
04-02-2006, 09:47 AM
Originally posted by MixMasterMike
yikes. ive only heard of that about one other time. u must not ride very hard No I ride it hard and over the summer im out for 3-4 hours just about everyday after work. I think it might have been making the noise for a while but with the exaust i couldnt hear it. I had to put the stock pipe on when i went someplace to ride and the noise was louder than the stock pipe.

brokside
04-07-2006, 12:56 PM
good news!!!
the chips i found on my filter were made of alluminium ...not metal so they weren't coming from any bearings...but from a crapy helicoil someone had made for me ... all the engine parts were fine ,piston, bearings ,crank...;)