Log in

View Full Version : Pics of Burgard's A-arms mounted


Chino886
03-29-2006, 12:46 PM
Alright, I am in need of a huge favor, I need some mounted pics of someone with Burgard A-arms to snap some pics from different angles for me. I think I have mine mounted upside down, backwards, and any other way that I could have screwed it up.

Thanks in advance!
400exrider707
03-29-2006, 01:08 PM
You could just post your pics and then we can tell you how they're wrong too.;)
Chino886
03-29-2006, 01:09 PM
too much caster
Chino886
03-29-2006, 01:10 PM
I definitely think something is wrong
Fred55
03-29-2006, 05:33 PM
You have the uppers on the wrong sides.
Chino886
03-29-2006, 06:36 PM
I will give that a try.....
Chino886
03-29-2006, 07:58 PM
Originally posted by Fred55
You have the uppers on the wrong sides.

I hope your right, I have a race on Saturday.
400exrider707
03-29-2006, 09:28 PM
yeah thats what I would say.;)
Chino886
03-30-2006, 05:56 AM
I hope you guys are right!
TBD
03-30-2006, 08:47 AM
Are those arms 1" forward? The uppers are definetlly on the wrong side but the lowers appear to have the shock mount on the arm more towards the rear of the arm so that's why I'm asking if there 1" forward. If they are the was not a good choice for a 400EX. The more I look at your picture if those aren't 1" forward then you might have the lowers on backwards as well. 0 forward arms should have the shock mount on the arm closer to the front of the arm. Make sure your shock isn't sitting at an angle from the top mount to the lower arm.
Chino886
03-30-2006, 08:49 AM
Originally posted by TBD
Are those arms 1" forward? The uppers are definetlly on the wrong side but the lowers appear to have the shock mount on the arm more towards the rear of the arm so that's why I'm asking if there 1" forward. If they are the was not a good choice for a 400EX.

Yes, they are 1" forward....can you please explain your answer further. I have an extended swingarm also.
TBD
03-30-2006, 08:54 AM
Originally posted by Chino886
Yes, they are 1" forward....can you please explain your answer further. I have an extended swingarm also.
The extended swingarm will definetlly help. I think we talked about this before but what my concern would be with running 1"forward arms on a 400ex is that the quad in stock form already has push in the frontend. By moving the arms forward it would only make it worse but by running a longer swingarm you should be right back to stock with the wieght bias.
QuadJunkies
03-30-2006, 09:20 AM
Did my pics help ya out Chino??
Chino886
03-30-2006, 09:38 AM
Originally posted by TBD
The extended swingarm will definetlly help. I think we talked about this before but what my concern would be with running 1"forward arms on a 400ex is that the quad in stock form already has push in the frontend. By moving the arms forward it would only make it worse but by running a longer swingarm you should be right back to stock with the wieght bias.

Hey TBD, that is why I was confused, I thought that you had said that if I had an extended swingarm, it would equal it out. But thanks for reminding me. I hope I can get those arms swapped out without taking everything off. I think I can.


Originally posted by QJ
Did my pics help ya out Chino??

Sure did QJ, Thanks a ton!