PDA

View Full Version : Rear End Noise?


RAPTOR80RACR990
03-28-2006, 08:45 PM
I went riding the other day on my Blaster and it is makng this weird noise somewhere around the rear end. Its like a chakling noise. What could this noise be? Thanks
ZeroLogic
03-28-2006, 08:51 PM
Check your rear bearing carrier, they might be worn out and starting to go. Is your chain hitting anything also?
RAPTOR80RACR990
03-29-2006, 08:43 AM
Originally posted by ZeroLogic
Check your rear bearing carrier, they might be worn out and starting to go. Is your chain hitting anything also?

No my chain isnt hitting anything.
zeppelin
03-29-2006, 01:58 PM
it is most likely your bearings.
i will be making a write up in the how to section about changing bearings soon, check it out.
03-29-2006, 06:20 PM
yep its bearings i had ALOT of bearing problems in my old 4 wheeler


go ride it for a wile at a fast speed and then put water on the bearing carrier and if it steams up the bearing is broke and its getting really hot
ZeroLogic
03-29-2006, 06:28 PM
Or you can see if your axle has play in it.
Sjorge450R
03-29-2006, 06:58 PM
Originally posted by ZeroLogic
Or you can see if your axle has play in it.

thats what I was going to reccomend....cause if your bearing are shot and you ride on them, they might take out the carrier.
03-29-2006, 09:14 PM
Originally posted by Sjorge300EX
thats what I was going to reccomend....cause if your bearing are shot and you ride on them, they might take out the carrier.

yea thats true
hondarider_8
03-30-2006, 12:06 AM
Like the others said, it is most likely your bearing carrier. The same thing happened to me, but I kept riding. I ended up having to buy a whole new bearing carrier. Check it out and don't ride until you find out, or it'll cost more than expected
RAPTOR80RACR990
03-30-2006, 06:02 PM
Alrght, I will have to check and see. But how much do you think that would cost?
zeppelin
03-30-2006, 06:29 PM
about $50 for a kit with seals.
madmandan11
03-30-2006, 08:17 PM
same thing happend to me i put my quad away one night, next day i took it out and it was a loud grinding/clanking noise, like others said dont let it get worse or else you will need a whole new bearing carrier like i did lol ended up costing me 300$ for everything and to take it somewhere to have it done... i tried to do it myself but couldent get axle nut off and got frusterated, if it is the axle you can test it by jacking up the rear end and moving wheels left to right and if u have any play then thats not good... hope some of this helps
Sjorge450R
03-31-2006, 04:26 AM
Originally posted by zeppelin
about $50 for a kit with seals.


nope. C&D racing has a kit with seals for $30. Just ordered one :chinese:
RAPTOR80RACR990
04-01-2006, 03:23 PM
Originally posted by Sjorge300EX
nope. C&D racing has a kit with seals for $30. Just ordered one :chinese:

Do you think you could send me the link?
Sjorge450R
04-01-2006, 04:06 PM
Originally posted by RAPTOR80RACR990
Do you think you could send me the link?

you gotta call them up. They dont really have a website... their number is....

402 614 2508
bwamos
04-02-2006, 10:59 AM
Originally posted by Sjorge300EX
you gotta call them up. They dont really have a website... their number is....

402 614 2508

Or you can post on their forum below. ;)