? on Blingstar DC nerfs

[Nick110]

I got my Blingstar DC nerfs today for the 06 450r.
http://i44.photobucket.com/albums/f29/nick110/DSC00263.jpg

Now to the question. On the Black things that bolt to the frame and connect to the nerf pegs are they supposed to have holes in them.

http://i44.photobucket.com/albums/f29/nick110/DSC00266.jpg
http://i44.photobucket.com/albums/f29/nick110/DSC00267.jpg
http://i44.photobucket.com/albums/f29/nick110/DSC00268.jpg

THis part that those Black things go into have holes in them and it came with Bolts to go through them.

http://i44.photobucket.com/albums/f29/nick110/DSC00265.jpg

[Hondacrf15]

You have to drill them. Mount the pegs on the bike, then mount the nerf bars, then drill and bolt.

[Nick110]

Also did anyone else have problems with the nets not fitting in the mounting things. The things that you string the nets through some of them are too small for the net to fit through.

[400exMO]

yeah you'll have to drill.

[bpimpdaddy21]

I ran into the same troubles that you did. In order to get the nets to fit, you just have to use a screwdriver of sorts, and push the nets through. I also had to drill ou the peg mounts also for the nerfs. On top of that I also drilled a mount for the front of the nerfs too, just some extra holding strength.

[laeger2fiddyr]

I HAVE THOSE ON MY 06, BEST NERF BARS EVER, MOUNTED UP REAL NICE!! JUST USE A FLAT SCREWDRIVER TO PRY OPEN WERE THE NETS GO THROUGH.

[bpimpdaddy21]

Also, anyone got a close up of the pegs where they mount to the frame? I have the footpeg attachments mounted to the frame with the round tube part above the bottom of the frame. When I had them the other way, they hung down pretty low, below the bottom of the frame. Which was is the correct way to mount them, as neither mine nor my brothers set came with instructions. Close up pics of the footpeg mounts would be nice too!

[laeger2fiddyr]

mount the pro peg mount with the bolts on the bottom and the peg on top, if you mount it the other way, they will be hanging down to far.

[bpimpdaddy21]

Originally posted by laeger2fiddyr
mount the pro peg mount with the bolts on the bottom and the peg on top, if you mount it the other way, they will be hanging down to far.

I noticed that also, and I mounted them the same way you said. Thanks!

[aroracer72]

WHen will people realize aftermarket is aftermarket and doesnt always fit!!!! If it looks like you must do soemthing, then you do, use your imagination. Hardly any aftermarket fits perfectly these days.
CHAD

[bpimpdaddy21]

Originally posted by aroracer72
WHen will people realize aftermarket is aftermarket and doesnt always fit!!!! If it looks like you must do soemthing, then you do, use your imagination. Hardly any aftermarket fits perfectly these days.
CHAD

Yeah but it doesn't hurt to ask first before something gets messed up. And just about everything of mine aftermarket fit just about perfectly, I dunno what you are buying...:confused:

[aroracer72]

Sorry am in a pissy mood and this past week ive spent 30 hours working on friends quads on stuff that is just silly and takes the smallest amount of thinkiing to figure out.....sorry for being soo rude...it is good to ask.....just lets forget i posted that....lol
CHAD