Iliketogofast
03-28-2006, 03:47 PM
Does anybody know the valve clearance for an 03 Raptor? It has a Stage 1 Hot Cam if that makes a difference.
Also, he has put a Wiseco piston (which shouldn't change jetting, I think it's stock bore) and a Hot Cam stage 1 cam. He also has a K&N + Big gun full sys and the K&N free flowing airbox lid. Anybody have any approximations on what the jetting should be?
It ran okay when he had just the pipe/filter, but now that he has that cam in there it's running too lean.
Any suggestions are welcome, thanks.
Also, he has put a Wiseco piston (which shouldn't change jetting, I think it's stock bore) and a Hot Cam stage 1 cam. He also has a K&N + Big gun full sys and the K&N free flowing airbox lid. Anybody have any approximations on what the jetting should be?
It ran okay when he had just the pipe/filter, but now that he has that cam in there it's running too lean.
Any suggestions are welcome, thanks.