TC cam

[danney f]

I just bought a TC racing cam off of ebay. does any one know who makes and sells this cam.
It is for a 300ex. the cam has TC national engraved on one side and 924 on the other. Any info would help.
thanks

[Blake24]

TC Racing Engines is the company that makes it.........

[Dave400ex]

Tom Carlson of TC Racing Engines. You can call Tom at 814-723-3514 and ask all about the Cam.

[danney f]

do they have a web site?

Originally posted by danney f
do they have a web site?

They don't have a website that I'm aware of. I'm not certain but I would almost bet that the TC cam is made by Web Cam, but built to TC's own specs.

[danney f]

thanks guys and if any one knows anything else please post a reply
thanks again

[Blake24]

his website iam sorry to say is "under construction" but i will give it to you anyways.......... www.tcracingengines.com

[Dave400ex]

KY Woods Rider, Do you have any Info on the TC XC Cam for the 400ex? I am wanting to get one but can`t find much info on it.

Originally posted by WarriorMan
KY Woods Rider, Do you have any Info on the TC XC Cam for the 400ex? I am wanting to get one but can`t find much info on it.

All I can tell you about it is that the guys who have it seem to like it. I called TC back at the end of '99 right after I got my 400 and asked about pipes, cams, pistons, etc for the woods, but I didn't get the exact specs on the cam. From what other guys report that have one though, it seems pretty good and a couple local MX guys are using it in their stock bore 400s to get some extra midrange pull.

[250rmike]

the 924 cam is a mx cam. are u the guy who bought it for like 9.99? i wanted to bid on it but i was out riding when it went off

[danney f]

Yes that was me, but i paid alot more than that. I just emailed him and asked him what he wanted for it.
You don't know any more about it do you.
I knew that the TC cam was a good one, but didn't know a hole lot about it.

[Dave400ex]

Thanks for the Info. I think I will go with the Cam. How have your TC Products been? I really like my Pipe.

[danney f]

I haven't tried any of their products yet, but I have yet to hear anything bad, only good.

I will post some info on what I think about the Curtis Sparks 330 big bore kit, the ported/polished head with enlarged titanium valve and the TC cam once I have it and installed it. I think I will add the cam and head first and give it a try. Then add the big bore. But i will most likely not be able to wait and have to install it all at once.

[250rmike]

it is a mx cam. the only other thing that i know about it is that it is a full race cam. does anyone know it a 250x with a 350x motor in it will beat a 330ex? both are built with cam,valves, high comp. piston, etc.

[danney f]

I don't know, but in a dirt wheels magazine they put Fourstroke's 330ex up against a stock 400ex and it beet it in everything.

Originally posted by WarriorMan
KY Woods Rider, Do you have any Info on the TC XC Cam for the 400ex? I am wanting to get one but can`t find much info on it. I've got the xc cam in my 416 and it hits real strong in the mid to top. I really like it . The bottom doesn't seem to suffer any power losses either. Running an 11-1 piston helps the bottom end though.

[250rmike]

yea but with that bike it was wider had shock and a bunch of stuff on it next to a stock 400. u cant put a built motor next to a stock. thats why they dont do it with 440ex's next to stock raptors and c-dales.

[Dave400ex]

Well that is good to hear about the XC Cam. The 400 needs more Mid and Top End. Thanks

[danney f]

"yea but with that bike it was wider had shock and a bunch of stuff on it next to a stock 400. u cant put a built motor next to a stock. thats why they dont do it with 440ex's next to stock raptors and c-dales."

true, if they added all the money they had in it, including the quad itself they could have bought a c-dale

Originally posted by WarriorMan
Thanks for the Info. I think I will go with the Cam. How have your TC Products been? I really like my Pipe.

The only TC product that I've got on my 400 is a TC pipe (which is great). But the TC stuff for 300s is good in my opinion and everyone that I have talked to about the TC products for the 400 have had all good things to say about them. I've kept my 400 motor stock internally to keep reliability top-notch, but when it's time to do a rebuild it will probably get all TC parts installed.