willie help

[bada440ex]

i cant pop awillie on my r what do i do

[dober250R]

rev it up and dump the clutch

[bada440ex]

i tried and it came about an inch off the ground , but i dont wheigh 115

[EXtreme-]

hang your nuts over the grab bar and try again

[maggiesboy]

-2 swingarm ?:devil:

[TheFontMaster]

Check your compression. If the motor won't lift the front wheels off the ground, it doesn't seem like it's making as much power as it should, and might be time for a rebuild.

[jon370r]

If you can't get your willie up then its time to find a new girlfriend.

[Tom TRX250R]

^^LMFAO!!!!

[250r4life]

Originally posted by jon370r
If you can't get your willie up then its time to find a new girlfriend.

now thats funny

[hondardr4life]

Mine pulls off the ground when I shift gears :confused: .:devil:

[bada440ex]

should it come up if i put a ftz 80over topend and a ftz head and a 38mm carb

[maggiesboy]

starting the engine seems to help, my sons and I sit in the garage and pull, and pull on the bars. All I get is a bunch of spit all over the bar pad.

The wife loves it, here are "her guys" on thier quads, in the garage, spitting and laughing, "doin' woolies" :D

[bada440ex]

it is started and im not 3 or 4 im 14

[250r4life]

how are you tires? if you have any tread at all you should have no trouble doing wheelies. when my r was stock with pipe and filter i could wheelie in 4th all day long.

so my guess is you either need new tires, or need to learn how to ride a wheelie on an R

[fmfracing5]

you must not have it on or somthing because i get my blaster to pop up in every gear with out the clutch come on now just dont be a puss and hit the gas

[Eddiesanders250]

takes a little time to learn how to ride a wheelie. where do you ride? is your swinger stock length?

[tmoney]

You cant just rev the heck out of it and dump the clutch it'll just spin and take off fast. You gotta get the revs up and let the clutch slowly at first and when you feel it hook up give it some more gas and let the clutch out. If your a wheely beginner try cruising in second then lean back and nail the throttle. It is good practice.

[bada440ex]

ride in Tishomingo Ms yes i have a stock swingarm and i do rev the heck out of it and it dont spin with stock gearin but fixing to have 15/34

[hang1p]

back that gearing up to about a 13 on the front and 38 or 39 in the rear 15/34 is like 1/4 mile drag set-up

[jason43050]

my 400ex will weelie in a sec. must be the driver. you not giving enough gas when your dumping the clutch. that 450r has more power than a 400, it should rise rather quickly

[maggiesboy]

Originally posted by bada440ex
but fixing to have

That is sweet.......is cousins Cooter and Daisey runnin' ya into da city to da motorsickle joint fo dem parts?

[450rJam]

stop being scared of it.
slide your @ss back on the seat
1st/2nd/3rd..........she should climb right up
if your too chicken try finding a small bump and gas it as the front tires hit the bump
CANT KEEP THE FRONTS ON THE GROUND WITH THIS ONE

[hondardr4life]

15/34 is WAYY too high. Try like 14/38, you will be fine, I run that with 18's. I don't know whats wrong, I haven't tryed it yet because I dont have enough road, but I guarentee I can pull mine up in 6th and keep it there.