2000ex
07-26-2002, 03:33 PM
Works with Elka Springs?
I have a set of Works Triple Rates w/rezzies (non-threaded preload) I am trying to dial in the spring rate and sag. I wish the springs on the came with their spring rate on them, but they don't. It appears to me that my shocks came with the same 1st and 2nd spring.
I have experimented with changing the preload so in theory they are currently running zero preload (I can compress with my hand and remove the clip). I also removed the largest spacer on the top spring to drop it even lower.
My theory is by running a similar setup as the SSD spring and corresponding spring Elka setup I will get a lower ride height, as well as better performance similar to that of a SSD shock.
I am under the impression that Elka is using Eibach and Hyperco springs for their setups. I am interested if anyone is running either of these springs on their Works as an upgrade, or their thoughts on making this upgrade.
I have a set of Works Triple Rates w/rezzies (non-threaded preload) I am trying to dial in the spring rate and sag. I wish the springs on the came with their spring rate on them, but they don't. It appears to me that my shocks came with the same 1st and 2nd spring.
I have experimented with changing the preload so in theory they are currently running zero preload (I can compress with my hand and remove the clip). I also removed the largest spacer on the top spring to drop it even lower.
My theory is by running a similar setup as the SSD spring and corresponding spring Elka setup I will get a lower ride height, as well as better performance similar to that of a SSD shock.
I am under the impression that Elka is using Eibach and Hyperco springs for their setups. I am interested if anyone is running either of these springs on their Works as an upgrade, or their thoughts on making this upgrade.