gbcap
03-23-2006, 05:57 PM
I put steel braided brake lines on...the master cylinder didn't seem to want to pump any fluid after sitting for 3 months.
so i take the line off the 04 that i have...pump the brake 3 times with no line on it and fluid flows like crazy.
pull the cap off. drain the black fluid out (dirty) put new fluid in. leave the cap off. mount on the bars. attached the lines. pumped...nothing no fluid flowing. small bubbles coming up thru the fluid in the resevoir, but no fluid flowing.
the directions on the box said to leave the lines off the calipers till the fluid was coming out of them. but i have nothing. pumped the brake about 400 times and nothing.
the back line and brake stiffened right up after about 50 pumps
IM LOST, has my dad stumped and my best friend. anything?
so i take the line off the 04 that i have...pump the brake 3 times with no line on it and fluid flows like crazy.
pull the cap off. drain the black fluid out (dirty) put new fluid in. leave the cap off. mount on the bars. attached the lines. pumped...nothing no fluid flowing. small bubbles coming up thru the fluid in the resevoir, but no fluid flowing.
the directions on the box said to leave the lines off the calipers till the fluid was coming out of them. but i have nothing. pumped the brake about 400 times and nothing.
the back line and brake stiffened right up after about 50 pumps
IM LOST, has my dad stumped and my best friend. anything?