400ex part out!

[A A R O N]

-2003 frame with title and black powdercoat...scratched up in some areas but overall good, and not bent. It does have a few gussets here and there. $200
- +4mm stroker motor, needs most of the top end re-done. $300
- Stock swingarm $55
- Stock a-arms and tie rods $50
- Stock shocks $30
- Leager +1 steering stem, painted flat black, straight...$100
- AC pro peg nerfs $120
- Front tires and wheels (brand new, grooved radials) $100
- gas tank $25
- front hubs $20
- rear hubs $20
- spindles $20
- oil tank/oil cooler/lines $55
- all electrical $50
- stock axle $30
- Lonestar carrier with good bearings $65
- thumb throttle with cable $20
- clutch perch with cable $20
- swingarm pivot bolt $10
- aftermarket lock nut--functional, sanded down to look new $40
- stock lock nut $15
- front brake lever and reservoir $20
- rear brake reservoir and pedal $20
- linkage, needs new bearings $10

[polcat1p]

what off set are the front wheels?

[Chino886]

give me a good deal on carrier and anti-fade....

[A A R O N]

not sure what offset the wheels are....

chino...sure lol 65 + 40 = 105

[polcat1p]

can measure them. They look like 4-1

[AtvKid4Eva]

PM'd ya

[xsr_racing28c]

i want the carrier, pm'd you

[exrider23]

i need rear caliper got one?

[epicjr77]

pmed you

[quadfamily]

you said that the top end of the motor needs to be redone, Does it run at all? How is the bottom end? How many hours on the stroker bottom end? What kind of rod does it have?

[ZSK]

$20 shipped for just the oil tank?

[Fendbass22]

PM'd you about motor questions

[rippin2]

160 shipped for the propegs and all electrical?

[kustomfab2003]

Do you have the title for the frame and is it in your name? I still need a frame with a good title.

[johnsls]

I'll take, - clutch perch with cable $20 & - front brake lever and reservoir $20

If you can ship them both to NJ-08807 for $40

Let me know.

[BORY]

PM'ed u

[TRX 500 KX]

will take your swing arm, carrier, piviot bolt, and linkage. Also interested in your rear brake hub and lock nut for the axle and your seat. please e-mail me back with a price.

nordyboy21@yahoo.co.uk

[racingquads22]

is the electrical stuff for sale?

[redipsweb]

do you still have the frame & how much to ship to Greenbrier,Tn 37073?

[TheChknhwk]

I need the carb to airbox air boot. Let me know how much shipped and if you could send me a pic to chknhwk@gmail.com.

[400exvet]

If axle is straight, I will take it. Carrier too, if still for sale. How much shipped to Md.? Thanks, Doug

[C&SRACIN426EX]

I was wondering if you still had the +4mm stroker motor and if so what all do you mean by the toop ends bad? Will it run at all and how long has the bottom end be togeather with that 4mm stroker in it?

[bud48422]

how much for the front rims n tires and do u still have the nerfbars let me know asap please 810 404 5210 Chris i dont check online often

[nwi45]

I want the rear hubs...ASAP lol

[44oEX]

you have a PM

[A A R O N]

Okay.....i just got back from vacation.....sorry i didn't get a chance to pull the thread before i left. I still have everything except the carrier. If you are interested in anything, send me a pm and i'll get busy packaging stuff up. Sorry for the delay....i will also add individual pictures of everything since the whole thing is torn down now. If somebody wants the whole thing, it's still available though.

[44oEX]

PM sent...consider the frame sold

[fatkid400]

I want the thumb throttle. pm me with your info.

[Chino886]

i got dibs on the steering stem and moose knuckle LOL!

[freerider]

price shipped for the gas tank and seat with latch?

[A A R O N]

35 shipped on the tank and petcock, and i don't have the seat

[Hondaexboy]

How much do you want for the front rims?
Which Doouglas are they?
thanks

[03hdsport]

do you still have your frame?

[A A R O N]

everything is sold except tank,snorkel and little nuts and bolts

[redracing88]

those prices are a steal!!!

[04TRX400EX]

I tried to PM you but your mailbox is full aparently.

Do you by a chance have a set of the stock handlebars for sale? If so how much shipped?

[bradrychlik]

i need the stock a arms and stock swingarm, do you have a stock steering stem? need that too, anything wrong with the parts? and how much shipped to 75455? thanks, brad

Shoot me a pm back about price on the front brake calipers. pad condition, slide condition, etc. My calipers right now on a quad I bought are frozen on the caliper slide so they will not float. let me know. thanks.

[A A R O N]

Originally posted by A A R O N
everything is sold except tank,snorkel and little nuts and bolts

can you guys read?:rolleyes:

although, i do have the front rims/tires and the stock bars left. $20 for the bars with new grips, and $100 for the douglas .190 front rims with grooved steel belted radials. Tires and wheels are brand new.

[stoopsy]

im interest in the frame where do u live in ohio can u sen me some pics my msn is camaro_rule@hotmail

[dean400ex]

do u still have the oil tank/ cooler/ and lines??? if so i will give u $ 50.00 for it.