Help with loose kickstarter

[edz250r]

I have a stock kickstarter that rattles a lot when the bike is running and even starts turning outward while I ride which really annoys me. I was told that there should be an o-ring inside the kickstarter lever, but I see that its missing. Does anyone know if you can just buy a rubber o-ring from your local hardware store or are there any other tricks to keep the kickstarter from moving all over?

[motochamp250]

i second this and would also like 2 know mainly b/c i dont wana pay like 90 bucks for a duncan one or esr one....

[beerock]

replace the spring, seal and ball. and pack some grease in it

if that doesnt work time for a billit kicker

[edz250r]

thanks...do you know if anyplace sells all the parts as a rebuild kit or do you have to order them all individually through servicehonda.com?

heard about your back...hope you get better soon!!

[Scottt89]

Most of the time you can buy a thicker O-Ring. It won't flip out as easily, but it will stay in. I did this on my Banshee, as opposed to doing the whole rebuild thing. I haven't had a problem. I just went to Lowes for the rings.

[Tom TRX250R]

They do not sell a rebuild kit, you must purchase the parts separetely but I took the time to find all the part numbers off of Service Honda you need for the rebuild. After you rebuild it, it will work like new, at least mine did! Tom

28302-965-000 Plug, Kick Arm

28333-124-000 Spring, Kick Starter

96211-08000 Ball, Steel, #81/4

[edz250r]

Awesome...thanks for the part numbers!!