Got big gun slip on but it's a little loose where it connects to header

[yellow400]

I got my big gun exhaust slip on, and it is a little loose where it connects to the header, and a little air comes out, anyone that has this have you had this problem, if so what did you do??


thanks

Go to the hnda dealer and ask for some exhuast sealer.

[Matt400ex_17]

You have to go buy a new exhaust gasket or take the one out of your stock exhaust! I also bought a different clamp cuz the one from big gun was to big..

[yellow400]

Originally posted by Matt400ex_17
You have to go buy a new exhaust gasket or take the one out of your stock exhaust! I also bought a different clamp cuz the one from big gun was to big..

where did you buy the differnt clamp from

[VegasEx'r]

If you want to save a few bucks, skip the Honda dealer & go to a Checker, Auto Zone, etc. place & buy some high-temp gasket sealer. Give it 24 hrs to cure & you should be set.

[Castor-426ex]

Big gun told me not to use the stock clamp cause it could damage the pipe....who knows?

[Tom Lynn]

Man do what i did with my new cobra I welded it to my header and i works fine just make sur that it is th right pipe u want.......;)