Trouble getting into Neutral on 300EX

[BIGBADBRAD2]

My 300ex is very difficult to get into Neutral. Sometimes I have to just turn the bike off and then I am able to get Neutral.
What do I need to adjust to fix this problem?

[TarheelRedRider]

Try adjusting or replacing (if needed) the clutch or maybe even changing the oil if it has been a while. I use to have the same problem till I put the new clutch in.

[300exOH]

Try adjusting the clutch cable first. I know on mine if the freeplay isn't set right I have a hard time finding neutral.

[2muchquad]

Try adjusting the clutch cable first

yup,almost definately the clutch cable,mine is the same way.;)

[SandShark400]

bump

[ChubbyEXby300]

ifound on my 300 if u rev the engine up a little bit it is easyier to shift to nuetral.

[450rJam]

clutch or cable for sure. try hitting N before you come to a complete stop.

[hard one]

try not being a pansy and just put it nuetral

let out on the clutch just befor it grabs or rev the engine


try riding a predator and find nuetral then wine about not finding nuetral on your 300.

[exrider4130]

check to see if the reverse lever on the side of the engine case looks bent..somehow mine got bent a little and was putting a bind on the internals....i replaced it and my 300 started goin into neutral like it was new...kinda weird, but it worked

[Cody_300ex]

Originally posted by ChubbyEXby300
ifound on my 300 if u rev the engine up a little bit it is easyier to shift to nuetral.

;)

[Sjorge450R]

Originally posted by ChubbyEXby300
ifound on my 300 if u rev the engine up a little bit it is easyier to shift to nuetral.


the secrets out.....lol

it took me a little while how to find nuetral. Its also easier if you are coasting to a stop with the clutch pulled in to find it.