PDA

View Full Version : KFX won't run.........



maggiesboy
03-19-2006, 12:43 AM
Removed the oil injector, dropped down to an 87.8 MJ, and the little pile O'smell falls on is tail? I installed a 90 MJ, same result:(

Any clear headed thoughts?

LT80
03-19-2006, 09:28 AM
Hmmm,
Maybe a better explaination of "falls on it's tail".
You mean the rider??? LOL

maggiesboy
03-19-2006, 10:50 AM
unfortunaly it wasn't rider error, 2/3 thru the straights the bike would run out of power. I watched his foot, he wasn't even close to the brake pedal.

Now I have a hot 6 year old! He wants to unload the machine (that is only 3 months old). He thought about it a bit more and asked me to bolt the injector back on.

maggiesboy
03-19-2006, 09:43 PM
what are the possibilities that 40:1 is too lean, and the rings are not sealing good at 2/3 straight away. Should I try going to 32:1 and test that theroy?

LT80
03-20-2006, 08:55 AM
It'll run the same with or w/o the injection.
I do recommend 32:1 but feel that isn't the problem.
Is it spitting and sputtering on top end?
Still do it w/ 92.5 main jet?

maggiesboy
03-20-2006, 09:01 AM
Yes, sputtering on top. I haven't put the 92.5 back in it yet.

I did block up the rear end, bring it to WOT and pull the choke, it sputtered reall bad. That is why I was thinking going heavier on the mix ratio.

maggiesboy
04-05-2006, 08:35 PM
I drained the 40:1 and replaced it with 32:1. It will continue to pull lap after lap. Here he is testing his Works Shocks today. It runs a whole lot better :D

LT80
04-06-2006, 07:17 AM
Cool pic:cool: :cool: :cool: