PDA

View Full Version : April Quad of the Month entry thread



TheFontMaster
03-17-2006, 09:39 AM
Ok well it's time to start entering your quads for the next Quad of the Month. This month it is open to everyone. Here is a link to the rules, and the mods list.

Rules;
http://www.exriders.com/vbb/showthread.php?s=&threadid=146713


Mods list;
http://www.exriders.com/vbb/showthread.php?s=&threadid=162941

MXRACER86
03-17-2006, 11:16 AM
Chassis | Suspension | Controls:

Frame: Stock
A Arms: Gibson Long travel
Swingarm: Gibson Standard Length
Steering Stem: Walsh +2
Stabilizer: Gibson
Axle: Lonestar +4
Carrier: Gibson
Locknut: Lonestar
Hubs F|R: Stock
Bars: Tag X-5 Cr-hi
Throttle/Clutch Lever: Honda Throttle/ Stock Lever
Grips: Smith
Nerfs: X-Factor Pro Pegs
Bumper: AC Dirt Screen
Grab Bar: DG National
Front Shocks: Custom Axis
Rear Shock: Custom Axis
Brake Lines: Streamline
Rotors F|R: Stock
Rims F|R: Douglas Ultimates
Tires F|R: ITP Holseshots MXR4



Body:

Plastic: Stock
Graphics|Seat Cover: K&K ATV
Number Backgrounds: Nac's Racing Number Plates
Handguards: Cycra Stealth MX
Bar Pad: TAG
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: Stock
Carburetor: Stock
Air Filter|Box: K&N Filter With Pro Flow Intake
Pipe|Silencer: LRD Pro 4 Series
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: Stock/Pro Design
Cooling: Stock Radiator
Other: Cam Mod

MXRACER86
03-17-2006, 11:18 AM
How do I add this pic in my first post?

MXRACER86
03-17-2006, 11:21 AM
and this one?

Moto49X
03-17-2006, 12:43 PM
Chassis | Suspension | Controls:

Frame: PC'd and gussett by BK Performance
A Arms: JB Long Travel
Swingarm: Laeger
Steering Stem: Tag +1
Stbilizer: PEP, not installed in pics
Axle: RPM Dominator
Carrier: RPM
Locknut: RPM
Hubs F|R: Stock PC'd
Bars: Tag T2
Throttle/Clutch Lever: Works Connection
Grips: Pro Grip
Nerfs: AC Propegs
Bumper: AC Stadium
Grab Bar: AC
Front Shocks:ELKA Quadrate, fully adjust
Rear Shock: Elka on GT Thunder linkage
Brake Lines: stock
Rotors F|R: Galfer Wave
Rims F|R: Hiper Technology
Tires F|R: Holeshot MXR4's



Body:

Plastic: Laker Custom
Graphics|Seat Cover: none/Quadtech
Number Backgrounds: Updogg
Handguards: Acerbis
Bar Pad: Tag
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Full TC National with a BMS Piston.
Bore & Stroke: Stock
Displacement: 450cc
Carburetor: Stock
Air Filter|Box: Uni
Pipe|Silencer: Yoshi Tri Oval
Clutch|Plates: Hinson
Gearing F|R: 13-38
CDI|Killswitch: Vortex.. Pro Design
Cooling: PWR Radiator
Other: Just look at the pics...


http://www.imagestation.com/picture/sraid202/p53623bad7b7ffc14d58c5493067278c5/efe93ee3.jpg http://www.imagestation.com/picture/sraid202/p7ec16df1e9fdaeb0f241fe87a594f9fa/efceb65b.jpg http://www.imagestation.com/picture/sraid202/p15c238fda4ca34f1f4e68aa9af92dd59/efceb659.jpg http://www.imagestation.com/picture/sraid202/p019d1342d2525ba16af2e6e6d7be1af9/efceb658.jpg http://www.imagestation.com/picture/sraid202/p6320c32212aa312658d774fc26a6e19f/efceb655.jpg

Moto49X
03-17-2006, 12:50 PM
last pic...

http://www.imagestation.com/picture/sraid202/pebba886b3d5b45a2827299c977456be5/efcffeca.jpg

f1502nv
03-17-2006, 12:56 PM
A Arms: Roll Design LOBO II
Swingarm: Roll Design 1/2 inch longer LOBO
Steering Stem: Roll Desgin
Stbilizer: Denton Racing
Axle: Rpm
Carrier: RPM
Locknut: RPM
Hubs F|R: Hardkor
Bars: Universal
Throttle/Clutch Lever:Honda TRX450R/Works Connection
Grips: Tag
Nerfs: AL Racing W/ IMS-ROLL Pegs w/ ims heel guards
Bumper: IMS-ROLL
Grab Bar: IMS-ROLL
Front Shocks: Elka 13" of travel all around
Rear Shock: Elka
Brake Lines: Galfer stell braided
Rotors F|R: Galfer
Rims F|R: Douglas
billet w/ beedlocks
Tires F|R: Maxxis



Body:

Plastic: Maler
Graphics|Seat Cover: Zing Cover
Number Backgrounds: IMS-ROLL
Handguards: IMS-ROLL
Bar Pad: Tag
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: CT RACING port and polish w/Pro Design intake
Bore & Stroke: 13:1 comp.
Displacement: 439cc
Carburetor: Stock
Air Filter|Box: Stock
Pipe|Silencer: CT RACING
Clutch|Plates: Hinson 9 plate
Gearing F|R: Sidewinder
CDI|Killswitch: Pro Design
Cooling: PWR oversized Radiator
Other stock gusseted frame by Epic racing, shifterIMS ROLL Frame guards Works Connection, belly pan Al Racing, chain roller PED, rear brake lever IMS-Roll, carbon fiber Performance carbon products, graphics by zing, Powdercoat Acrylichrome


__________________

f1502nv
03-17-2006, 12:57 PM
1

f1502nv
03-17-2006, 01:01 PM
2

RaptorRacer45
03-17-2006, 01:08 PM
2001 Yamaha Raptor

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Stock
Swingarm: Stock
Steering Stem: Stock
Stbilizer: none
Axle: Durablue
Carrier: Stock
Locknut: Chosen Performance
Hubs F|R: Stock
Bars: Tag T2
Throttle/Clutch Lever: Stock
Grips: Tag
Nerfs: AC Standered
Bumper: PRM Desert
Grab Bar: PRM Baja
Front Shocks: YFZ Stock
Rear Shock: Stock
Brake Lines: Stock
Rotors F|R: Stock/Emgo
Rims F|R: Douglas Red/OMF Beadlocks
Tires F|R: ITP Holeshot XCR/Maxxis Razr2



Body:

Plastic: Stock
Graphics|Seat Cover: GYTR
Number Backgrounds: Go For it/Performance Cycles
Handguards: Powermadd
Bar Pad: Tag
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 660
Carburetor: Stock
Air Filter|Box: Ready Racing/stock
Pipe|Silencer: HMF
Clutch|Plates: Stock
Gearing F|R: 13/42
CDI|Killswitch: RevMaxx/Pro design
Cooling: Stock
Other: Full PRM Skids, Shockwears...


http://www.imagestation.com/picture/sraid202/p2bcb4ccdeaf9189f7c17f4da50c706e1/efceac84.jpg

http://www.imagestation.com/picture/sraid201/pa4a8c1bb8a92d4f439709c9552393811/f03c5bfb.jpg

http://www.imagestation.com/picture/sraid201/pb8b74e8fccdd875a68d2e28c6ae6ae02/f03c5c00.jpg

trick450r
03-17-2006, 04:21 PM
Chassis | Suspension | Controls:

Frame: Stock Powdercoated trans blue
A Arms: LSR comp +2 Powdercoated trans red
Swingarm: Stock powdercoated trans blue
Steering Stem: LSR +1 chrome antivibe
Stbilizer: Twin pep adjustable's
Axle: LSR axcalibur chrome
Carrier: stock
Locknut: stock
Hubs F|R: front-stock rear-hiper integrated
Bars: Pro taper se
Throttle/Clutch Lever: Both ASV
Grips: Oury
Nerfs: AC
Bumper: AC
Grab Bar: AC
Front Shocks: Elka elite fully adjustable
Rear Shock: Elka elite fully adjustable with Elka elite 2-piece link
Brake Lines: LSR SS
Rotors F|R: front-stock rear- galfer wave
Rims F|R: front- ITP c-series jet black rear- 8x8 hiper dual bead integrated hub
Tires F|R: front- 20 inch mxr4's rear- 18 inch mxr4's



Body:

Plastic: Maier 1 piece race cut front White rear- White maier
Graphics|Seat Cover: DASA
Number Backgrounds: Nacs
Handguards: none
Bar Pad: Pro Taper
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: - shaved head to raise compression, ported and polished by DASA SS exaust, titanium intake valves, Bored intake valve, shorted valves and guides, 3-angle valve job, WEB dasa-grind cam, SS springs and titanium clips,
Bore & Stroke: 14.5:1 total compression
Displacement: 450cc
Carburetor: Taper bored FCR
Air Filter|Box: k & n filter, k & n outerwear, no lid, dasa intake
Pipe|Silencer: Dasa full header and mid-pipe, dasa silencer
Clutch|Plates: Rebuilt clutch with heavier plates
Gearing F|R: 13-42
CDI|Killswitch: ignition- full crf, lightened CRF flywheel with machined case, adjustable ignition plate, crf cdi, crf stator assembly, crf wiring harness, modifed trx stator cover pro design kill switch
Cooling: No fan
Other: machined crank and counterbalance, custom double wide pegs, TM design works roller, PEP upper roller, TM regular roller, ASV clutch has hot start, DID x-ring chain, oury grips (not pictured), LSR brake line clamps



alright more pics
http://img376.imageshack.us/img376/8422/qotm19sd.jpg (http://imageshack.us)
http://img295.imageshack.us/img295/149/qotm28kv.jpg (http://imageshack.us)
closeup of the twin peps
http://img359.imageshack.us/img359/8780/qotm39zo.jpg (http://imageshack.us)
http://img58.imageshack.us/img58/9766/qotm41ma.jpg (http://imageshack.us)
http://img359.imageshack.us/img359/2613/qotm52pk.jpg (http://imageshack.us)
http://img58.imageshack.us/img58/602/qotm65lc.jpg (http://imageshack.us)
http://img70.imageshack.us/img70/975/qotm78ug.jpg (http://imageshack.us)
http://img70.imageshack.us/img70/4081/qotm88mr.jpg (http://imageshack.us)
http://img70.imageshack.us/img70/8369/qotm96tl.jpg (http://imageshack.us)
http://img70.imageshack.us/img70/7688/qotm106rp.jpg (http://imageshack.us)

kustomfab2003
03-17-2006, 06:16 PM
Chassis | Suspension | Controls:

Frame: 2001 400ex
A Arms: Roll Lobo II +3 LT
Swingarm: Roll Design + 1/2
Steering Stem: Gibson/W billet clamp and trail tech computer
Stbilizer: Denton
Axle: Lonestar 2+2
Carrier: Billet double row
Locknut: Lonestar
Hubs F|R: Billet fronts stock rears
Bars: Trail TEch X-bar
Throttle/Clutch Lever: Ball Bearing Twisty
Grips: SCott
Nerfs: IMS Pro Peg
Bumper: Blingstar DC series
Grab Bar: AC
Front Shocks: Custom Axis compression/rebound
Rear Shock: Custom Axis
Brake Lines: Galfer
Rotors F|R: Galfer
Rims F|R: Burgard Rear / IMS Fron
Tires F|R: Kenda Klaw 22/7/10 front 20/11/8 rear



Body:

Plastic: Maier Silver
Graphics|Seat Cover: N Style seat cover
Number Backgrounds:
Handguards: Power MAdd
Bar Pad: N/A
Fuel Tank: Clarke 5.5 galloon



Engine|Drive System: 2002 CRF 450

Cylinder|Head: Athena 488 head ported and polished
Bore & Stroke:
Displacement: 488
Carburetor: FCR w/ power now and Quickshot
Air Filter|Box: K&N with custom box
Pipe|Silencer: Stock CRF shell with Pro Moto insert
Clutch|Plates: Hinson clutch components w/ DP Plates
Gearing F|R: 14/38
CDI|Killswitch: Pingle
Cooling: PWR radiator
Other: in line coolers, wide ratio Baja Designs tranny, gussetted frame, etc...

kustomfab2003
03-17-2006, 06:17 PM
1

kustomfab2003
03-17-2006, 06:20 PM
2

kustomfab2003
03-17-2006, 06:21 PM
3

kustomfab2003
03-17-2006, 06:21 PM
4

kustomfab2003
03-17-2006, 06:22 PM
5

walshdale77
03-17-2006, 10:00 PM
Chassis | Suspension | Controls:

Frame: Stock
A Arms: Stock Long Travel
Swingarm: Stock
Steering Stem: Stock
Stbilizer: Denton (not pictured)
Axle: Stock
Carrier: Lonestar Racing
Locknut: Stock
Hubs F|R: Stock
Bars: Tag Metals
Throttle/Clutch Lever: Stock
Grips: Oury Waffle
Nerfs: A/C Pro Pegs w/ Heel Guards
Bumper: Stock
Grab Bar: Stock
Front Shocks: TCS converted Ohlins Tripple Rate ZPS Piggybacks
Rear Shock: Custom Axis Dual Rate w/ Remote Rezzie
Brake Lines: Galfer Front and Rear
Rotors F|R: Galfler
Rims F|R: ITP 4+1 Offset, Champion Beadlocks 8x8
Tires F|R: ITP Holeshot's, R/A Shredders



Body:

Plastic: Stock Moto Silvers
Graphics|Seat Cover: nMotion Race Technologies Grahics and Jividens Seat Cover
Number Backgrounds: Baldwin Motorsports
Handguards: Powermadd
Bar Pad: Tag Patriotic
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock, Port and Polished
Bore & Stroke: Stock
Displacement: 432cc
Carburetor: None
Air Filter|Box: K&N
Pipe|Silencer: FMF Shorty
Clutch|Plates: ATK Revised
Gearing F|R: Stock
CDI|Killswitch: Pingle
Cooling: Evan's Coolant, Stock Radiator
Other:

walshdale77
03-17-2006, 10:01 PM
picture #2

walshdale77
03-17-2006, 10:02 PM
picture #3

walshdale77
03-17-2006, 10:03 PM
picture #4

yfz450rider29
03-18-2006, 01:43 PM
Chassis | Suspension | Controls:

Frame: Stock
A Arms: Lonestar +2 LT
Swingarm: Lonestar
Steering Stem: stock
Stabilizer: PEP
Axle: Dura Blue +4
Carrier: Lonestar
Locknut: Durablue
Hubs F|R: Stock
Bars: Tag T2
Throttle/Clutch Lever: Stock
Grips: Scott Hurricane MX
Nerfs: GYTR
Bumper: AC Stadium
Grab Bar: AC
Front Shocks: Axis LT
Rear Shock: Axis LT
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: Douglas Ultimates
Tires F|R: Kenda Klaw



Body:

Plastic: Maier Black
Graphics|Seat Cover: Terry Racing
Number Backgrounds: Terry Racing
Handguards: Power Madd
Bar Pad: TAG
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: GYTR 13.1
Bore & Stroke: Stock
Displacement: Stock
Carburetor: Stock
Air Filter|Box: GYTR Dual Stage W/outerwear
Pipe|Silencer: Duncan Fat Boy 4
Clutch|Plates: Hinson
Gearing F|R: 14, 37
CDI|Killswitch: Stock/Pingel
Cooling: Stock Radiator
Other: Hot Cam, AC Skid Plate (not in pic), nacs mud caps

yfz450rider29
03-18-2006, 01:44 PM
another

yfz450rider29
03-18-2006, 01:45 PM
last one

416exmx
03-19-2006, 02:53 PM
Chassis | Suspension | Controls:

Frame: JB Racing Converted
A Arms: Houser +3 LT
Swingarm: Laegers +1.25
Steering Stem: Burgurds +1
Stbilizer: none
Axle: RPM +4
Carrier: RPM
Locknut: RPM
Hubs F|R: stock 400ex
Bars: Renthal
Throttle/Clutch Lever: stock 400ex
Grips: Renthal
Nerfs: AC
Bumper: AC
Grab Bar: stock
Front Shocks: Custom Axis tripple rate dual adjust
Rear Shock: TCS dual rate dual adjust
Brake Lines: Fastline
Rotors F|R: stock 400ex
Rims F|R: Douglas/Douglas beadlocks
Tires F|R: Kenda/Maxxis



Body:

Plastic: Laker Custom
Graphics|Seat Cover: Goforitgraphics/One Industries
Number Backgrounds: none
Handguards: Acerbis
Bar Pad: Renthal
Fuel Tank: stock 400ex



Engine|Drive System: 03 CRF450

Cylinder|Head: stock CRF450
Bore & Stroke: 96.0mm / 62.1mm
Displacement: 449cc
Carburetor: FCR41mm
Air Filter|Box: K&N/stock
Pipe|Silencer: Baldwin Motorsports
Clutch|Plates: Stock CRF
Gearing F|R: 13/39
CDI|Killswitch: CRF/Pro-Design
Cooling: PWR radiator
Other: OMF shrouds and seat latch, Billett gas cap, stainless bolt kit, DID chain, Hinson brake petal, Walsh kickstart extender, YZ kick lever

416exmx
03-19-2006, 02:54 PM
2

416exmx
03-19-2006, 02:55 PM
3

416exmx
03-19-2006, 02:57 PM
4

416exmx
03-19-2006, 02:58 PM
last one

xrxmxcx
03-19-2006, 03:43 PM
full houser yz426f

Chassis | Suspension | Controls:

Frame: houser yz426 250r geometry
A Arms: houser +3 LT
Swingarm: houser no link +1
Steering Stem: laeger protrax anti-vibe
Stbilizer: n/a
Axle: rpm dominator
Carrier: durablue
Locknut: lsr antifade
Hubs F|R: honda 400ex f&r
Bars: tag metals
Grips: renthal
Nerfs: ac propeg
Bumper: ac mudscreen
Grab Bar: ac grab bar
Front Shocks: custom axis
Rear Shock: custom axis
Brake Lines: galfer stainless braided
Rotors F|R: 400ex front, wave galfer rear
Rims F|R: douglas 4:1 front, douglas 9" rear beadlocks
Tires F|R: klaw MXR



Body:

Plastic: red maier 250r
Graphics|Seat Cover: k&k atv, one industries seat cover
Number Backgrounds: k&k atv
Handguards: acerbis rally
Bar Pad: tag metals
Fuel Tank: clarke



Engine|Drive System:

Cylinder|Head: stock yz426
Bore & Stroke: stock
Displacement: 426.0 c.c.
Carburetor: fcr
Air Filter|Box: k&n w/ aluminum box
Pipe|Silencer: stock header with shorty big gun
Clutch|Plates: stock
Gearing F|R: 14/38
CDI|Killswitch: prodesign
Cooling: walsh race craft radiator (c&r)
Other: shes quick

http://i35.photobucket.com/albums/d177/xrxmxcx/2d4a635a.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/659826b0.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/48e1ca04.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/286f337f.jpg

stalefish_132
03-19-2006, 07:28 PM
its worth a try...

Chassis | Suspension | Controls:

Frame: stock & white
A Arms: stock & red
Swingarm: stock & red
Steering Stem: stock & black
Stbilizer: none
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R:stock
Bars: tag
Throttle/Clutch Lever: CR250 (not in pictures)
Grips: progrip
Nerfs: none
Bumper: stock
Grab Bar: stock
Front Shocks: works triple rates with romote rezzy’s
Rear Shock: works with romote rezzy
Brake Lines: stock fronts & SS rear.
Rotors F|R: stock
Rims F|R: ITP T9s/stock rear’s
Tires F|R: Razr’s F/B



Body

Plastic: stock
Graphics|Seat Cover: DMP (not in pictures)
Number Backgrounds: none
Handguards: none
Bar Pad: protaper
Fuel Tank: stock



Engine|Drive System

Cylinder|Head: ported & polished
Bore & Stroke: 87mm bore x 74mm stroke
Displacement: 439cc
Carburetor: FCR39mm
Air Filter|Box: UNI/stock
Pipe|Silencer: Stroker SX1
Clutch|Plates: hinson 8 plate
Gearing F|R:
CDI|Killswitch: stock
Cooling: air scoops
Other: full skid plates & modded air box

stalefish_132
03-19-2006, 07:30 PM
...

stalefish_132
03-19-2006, 07:32 PM
sry its a bit dirty in these pics...

stalefish_132
03-19-2006, 07:39 PM
last one..

Franky G
03-20-2006, 05:50 PM
My 1999 416EX:D :D :D

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Houser +2 RT
Swingarm: Stock
Steering Stem: Stock
Stabilizer: None
Axle: Durablue Eliminator 2+2
Carrier: RAD double row
Locknut: Stock
Hubs F|R: Stock
Bars: Tag X5
Throttle/Clutch Lever: Moose Fly Clutch Assembly
Grips: 909 Grips
Nerfs: AC Racing
Bumper: DG Classic Style
Grab Bar: Stock
Front Shocks: Works Pro Series
Rear Shock: Stock
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: Stock
Tires F|R: Razr MX, Holshot MXR4



Body:

Plastic: Maier Race Cut
Graphics|Seat Cover: Nac's Racing
Number Backgrounds: Nac's Racing
Handguards: UFO
Bar Pad: TAG
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Hotcams Stage 1
Bore & Stroke:
Displacement: JE Piston 416cc
Carburetor: Stock w/170main
Air Filter|Box: UM Desing w/K&N
Pipe|Silencer: Full Yoshimura RS-3 Competiton
Clutch|Plates: Hinson HD Springs
Gearing F|R: Stock 15-38
CDI|Killswitch: Stock
Cooling: UM Desing Air Scoops
Other: Misc Billet Parts, IMS Pegs, Shock covers, UM Airbox

Franky G
03-20-2006, 05:51 PM
2

Franky G
03-20-2006, 05:52 PM
3

Franky G
03-20-2006, 05:53 PM
4

Franky G
03-20-2006, 05:55 PM
5 older pic but it looks good!!

Pitmom
03-21-2006, 12:49 PM
This is Clayton Heath's #1 2004 Kasea. He won the 2005 ITP Quadcross Championship in the 90cc Mod class on it.

Chassis | Suspension | Controls:

Frame: Kasea stock with gussets
A Arms: +2
Swingarm: by John Anderson
Steering Stem: Stock
Stbilizer: n/a
Axle: +2
Bars: TAG

Grips: Spider
Nerfs: A/C
Bumper: Bling+Star
Grab Bar: stock
Front Shocks: PEP Triple rate custom
Rear Shock: PEP Triple rate custom
Rims F|R: Douglas
Tires F|R: ITP

Plastic: Black Kasea Plastics
Graphics|Seat Cover: custom graphics by ZLT.com
Number Backgrounds: custom by ZLT.com
Bar Pad: TAG

Engine|Drive System: Mostly Mollasi

Cylinder|Head: by John Anderson
Displacement:
Carburetor: Keihn 28mm
Air Filter|Box:
Pipe|Silencer: ATV Racing
Clutch|Plates:
Gearing F|R:
CDI|Killswitch:
Cooling:
Other:

http://tinypic.com/rw08hv

http://i1.tinypic.com/rw5eue.jpg
__________________

builtyfz450
03-22-2006, 08:00 PM
Frame: Stock
A Arms: + .5 houser trans red
Swingarm: + 1.25 houser trans red
Steering Stem: Roll design +1
Stbilizer: GPR
Axle: stock
Carrier: Houser
Locknut: stock
Hubs F|R: stock
Bars: pro taper fat bars
Throttle/Clutch Lever: Honda thunb throttle MSR AOF clutch lever
Grips: Oury
Nerfs: AC pro pegs
Bumper: AC mudscreen
Grab Bar: Pro aluminum
Front Shocks: Elka triple rates with piggyback reseviours
Rear Shock: Elka triple rate
Brake Lines: Streamline
Rotors F|R: Stock
Rims F|R: Hipers
Tires F|R: Razr 2s



Body:

Plastic: Maier silver
Graphics|Seat Cover: Instagator racing
Number Backgrounds: Updog
Handguards: Cycra
Bar Pad: Pro taper
Fuel Tank: Clarke
2005 yamaha yfz 450 special editon


Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: stock
Carburetor: Eldlerbrock
Air Filter|Box: Uni Air filter With no lid
Pipe|Silencer: Curtis Sparks
Clutch|Plates: Hinson 9 Clutch basket, pressure plate, and disks
Gearing F|R: 13 tooth front sprocket back is stock
CDI|Killswitch: pro design kill switch
Cooling: stock
Other: Herrmann 6 point subframe, GT Thunder linkage,GYTR kick start setup, GYTR frame gaurds, Prm skid, Rear wave rotor, plates, rear brake block off, and special thanks to mike Faybic

builtyfz450
03-22-2006, 08:00 PM
another

thump4863
03-23-2006, 07:42 AM
2004 Honda TRX 450R

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Houser +.5 Long Travel
Swingarm: Houser +1.25
Steering Stem: JB Racing
Stbilizer: Precision
Axle: Durablue
Carrier: Houser
Locknut: Stock
Hubs F|R: Stock
Bars: Tag T2
Throttle/Clutch Lever: Motion Pro Twist Throttle
Grips: Scott
Nerfs: AC Racing
Bumper: Pro Armor
Grab Bar: AC Racing
Front Shocks: Elka Quadrate Long Travel
Rear Shock: Elka Dual Rate Long Travel
Brake Lines: Streamline
Rotors F|R: Stock
Rims F|R: Hiper
Tires F|R: Front - Maxxis Razor 2; Rear - ITP HD



Body:

Plastic: Maier - 1 piece XC front
Graphics|Seat Cover: K&K ATV
Number Backgrounds: Powersport Graphixs
Handguards: Cycra Pro Bend
Bar Pad: Tag
Fuel Tank: IMS



Engine|Drive System:

Cylinder|Head: Port and Polish, Wiseco 11.5:1 Piston
Bore & Stroke: Stock
Displacement: 450
Carburetor: Stock
Air Filter|Box: Uni
Pipe|Silencer: HMF
Clutch|Plates: Rekluse
CDI|Killswitch: Pro Design
Cooling: Stock


http://img.photobucket.com/albums/v160/thump4863/100_1861.jpg

http://img.photobucket.com/albums/v160/thump4863/100_1863.jpg


http://img.photobucket.com/albums/v160/thump4863/100_1864.jpg


http://img.photobucket.com/albums/v160/thump4863/100_1866.jpg

http://img.photobucket.com/albums/v160/thump4863/100_1860.jpg

trxfour50r
03-23-2006, 04:41 PM
05 Trx with all of the following mods


Chassis | Suspension | Controls:

Frame: stock
A Arms: holz
Swingarm: holz
Steering Stem: holz
Stbilizer: denton
Axle: lonestar
Carrier: stock
Locknut: lonestar
Hubs F|R: stock
Bars: pro taper
Throttle/Clutch Lever: stock MsR
Grips: MSr
Nerfs: AC Pro Pegs
Bumper: Blingstar
Grab Bar: stock
Front Shocks: Axis with titaniam springs
Rear Shock:Axis
Brake Lines: stock
Rotors F|R: stock
Rims F|R: Hipers
Tires F|R: Holeshots



Body:

Plastic: stock
Graphics|Seat Cover: Jh Graphics
Number Backgrounds: Jh Racing
Handguards: Aceribics
Bar Pad: Pro Taper
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: Port And Polish 13.5 JE Piston 208 web cam
Bore & Stroke: Stock
Displacement: 450
Carburetor: Fcr 39mm
Air Filter|Box: K@n Air filter
Pipe|Silencer: Rossier Full System
Clutch|Plates: stock
Gearing F|R: 14/38
CDI|Killswitch: Crf wiring harness stator cdi
Cooling: stock
Other: Black frame, bottom arm, Nerf Bars, stem front bumper, Green swingarm a-arm hand Guards.

Here is some pics of my quad thanks for looking and hope you vote for me

trxfour50r
03-23-2006, 04:42 PM
http://img.photobucket.com/albums/v691/crffour50r/Randys%20quad/quad3.jpg
http://img.photobucket.com/albums/v691/crffour50r/Randys%20quad/quad8.jpg
http://img.photobucket.com/albums/v691/crffour50r/Randys%20quad/quad5.jpg
http://img.photobucket.com/albums/v691/crffour50r/Randys%20quad/quad7.jpg
http://img.photobucket.com/albums/v691/crffour50r/Randys%20quad/quad1.jpg

BlasterEaten250
03-23-2006, 07:47 PM
Looks like it is going to be a hard decision this month! Keep 'em coming!:cool:

TheFontMaster
03-24-2006, 01:29 PM
Well thats it for the entrys for this month, I will have the poll set up soon.