450r tail light on 400ex

[sburton1]

dose some one make a kit to install 450r tail light on my 400ex? ive got a new 450r tail light from ebay but dont know if itll work on my 400ex wiring harness surley some one makes one thanks guys!

[premiumtommy]

just cut the wires and splice them together...

its a tailight for christ sake....not a computer





u were gonna waste money on a tailight harness.....:huh

[sburton1]

well the problem is the harness for the 450 is like a plug in and their tosend apperar to be wires stinking out like on the stock 400 im not an idiot just dident want to mess up the plug for the new tail light

[JOEX]

You will need switches for the levers to activate the brake light. I used banjo bolt switches for both the front and rear levers.

There is a way to use the factory neutral safety that is on the clutch lever. It's supposed to be able to be mounted on the brake lever if an existing hole is tapped. A spring activated switch from a motorcycle can be used for the rear lever.

I started a write up on how to do this but got sidetracked with some other things:ermm: