Elka Elites for sale

[AceLtz]

Im selling a set of Elka Elites for a 400ex. I bought them for my z400 but they turned out to be for the ex:mad: Thier high and low speed adjustable, rebound, and preload. Their in great condition. Thier valved for 170-200lbs +2 a arms. These are top of the line elkas and retail for about $1300. im asking $775 shipped for them.
http://i21.photobucket.com/albums/b292/aceaspades909/IMG_8777.jpg

[440_Turtle]

If i read your post correctly you bought them for your LTZ and are selling them b/c they were for and EX. Those two shocks are compatible and interchangable and will work on either bike w/o modifications

[AceLtz]

the z400 shocks are 16 7/8 inches, the 400ex are 16 1/4. i dont want to lose that travel, and i dont want it sitting so low. I had also planned on using them on my ltr but those are 17 inches, i cant use either one. so thier for sale.

[400exrider99]

why cant u just return them

[AceLtz]

thier used. i didnt get them from elka i bought them from another person

[NCexRider]

That's a pretty good deal on those, wish I had the $.;)

[cracer250]

Aceltz is a good guy to deal with. I bought some stuff from him a while back and he's very honest.

[YannGumbo]

Shocks from a 400EX will not fit a Z-400, the 400EX shocks are 3/4inch shorter.
When used on a Z-400 the frame clearance will be too low and if you hit a hard impact and have the shocks bottom out you will be bending tie-rod and have chances of breaking parts.
If you use a Z-400 shock on a 400EX you will be putting strees on the ball joints (and will have them break eventually), ride height will also be high off the ground.
Almost none of the ATV manufacture use the same geometry for shocks, shocks are never inter-changable from a quad to another.

[AceLtz]

still for sale...