PDA

View Full Version : 250sx Kickstart Problem!



2002-440ex
03-14-2006, 08:18 PM
Just got a 1985 250sx..bike is mint..but Kickstart wont grad, and I can't jump start it, it wont grab..whats going on here?

400eXr1d3rZ
03-14-2006, 08:49 PM
do you not have compression? or will the bike just not start, but you have compression?

prepracing
03-14-2006, 11:13 PM
I know on a 250x quad, if kick starter has ever been taken off...when you put it back on you have to put it on in a way that kind of loads up the spring so that the kicker will engage. So if your kicker has ever been off then that could be the problem

2002-440ex
03-15-2006, 07:33 AM
Bike has compression..well the guy I got it from, said that after he got the engine job done the kickstart would only grab sometimes, so Im guessin theres a fricked up spring somewhere

Daypass
03-15-2006, 05:42 PM
I bet some meathead didnt get the kick start gear in there properly, pull the side cover and check the way the gear messes together. Ive had that problem before,There is a half gear inside that actuates a cam that pushes a gear into the fly wheel ring gear. Hard to explain but it isnt rocket science. Good luck

2002-440ex
03-17-2006, 07:16 PM
Thanks for the help Boys, the kickstarter gear was not in place..and I needed a one way clutch, but was able to find a good running motor for 100 bux..so I got er going with a spare engine now!