PDA

View Full Version : Stroker Question


abuckley1290
03-13-2006, 03:53 PM
i was wondering if i get a complete stroker bottom end crank with a 76mm crank, what do i need to do to the topend and how much will it cost?
BORY
03-13-2006, 05:55 PM
Originally posted by abuckley1290
i was wondering if i get a complete stroker bottom end crank with a 76mm crank, what do i need to do to the topend and how much will it cost? is for a 426 or 440?
abuckley1290
03-13-2006, 06:20 PM
right now its all stock. I will prob go for the 426
400exbiggun
03-13-2006, 06:58 PM
buy my 76mm tc on ebay now...its at 200 ending tomorrow with 1 bid

a 76mm crank is a +6 crank. Thats a +40cc right there. To get a 465 you need a 88mm bore (425 bore) and the piston to match the crank...IE from the MFG like mine is TC...tc sells modified wiseco pistons.

You can use stock everything else if you prefer, but i would upgrade cam
jordan_m6
03-13-2006, 08:40 PM
how safe is it to put a stroker kit in. i know what it does but is it a high maintanance set up.
stalefish_132
03-13-2006, 11:43 PM
i run a 87mm x 74mm stroke and it runs like a clock with alot of get up and go;) i would recomend a stroker to any one who likes low/ mid range power.