PDA

View Full Version : lt250r part out 1987



whippedchaos
03-09-2006, 11:45 AM
I have a 1987 Suzuki Quadracer LT250r almost complete. Everything I have is forsale. I do not have a arms and shocks front or rear. Motor had a fresh topend done and has only been run for like 5 minutes to hear how it sounded. Has been bored .050 over with wiseco piston. New clutch cable, throttle cable, and new uni air filter. Has holeshot xct on the rear in 22/11/10 and fast trekkers in the front 21/7/10 both in very good shape. Everything is forsale on it and I can get pics if needed. Make offer on whatever you want.

whippedchaos
03-10-2006, 07:07 AM
ttt

braxton
03-10-2006, 09:26 PM
how much for the engine

03-11-2006, 06:22 PM
how much for just the topend and the carb? do you take paypal?

whippedchaos
03-11-2006, 07:14 PM
I would prefer not to part the motor out. You can buy the whole motor for 200.00, the carb i will sell for 30.00.

Some of the other parts I have are

Durablue axle decent shape 24 spline can use yamaha hubs on it- 50.00
front and rear calipers- 35.00 for all 3 or 15.00 for each one no brake pads
durablue axle nut brand new never ridden on. 35.00
brand new clutch cable-5.00
brand new throttle cable-5.00
ac racing grabbar ok shape-25.00
Front hubs with rotors, rotors are in ok shape 15.00 per side or 25.00 for both.
spindles-10.00 for the pair not bent
front brake resevoir off a 300ex good shape-30.00
footpegs-10.00 for the pair
plus other stuff just can't think of everything right now. just ask and i will see if i still have it. pics available upon request.

whippedchaos
03-11-2006, 07:15 PM
Also will trade the complete quad for a decent xr or crf 50

Doak450r
03-12-2006, 12:53 AM
pm me a price gfor the frame, thumb throttle and cable the plstic hood, both tie rods with ends, front rims, thats about it for now

Blaster x
03-12-2006, 05:16 AM
PM me a price on the Durablue axle,durablue axle nut,brand new clutch cable and the brand new throttle cable

whippedchaos
03-13-2006, 07:02 AM
I also have a pro design kill switch black in color i will sell for 15.00
A full length PRM chassis skidplate wiht no mounting hardware which i will sell for 25.00
Anyone needs pics I will get some today

03-13-2006, 02:48 PM
is the carb in good shape? does it need a rebuild or new floats? do you take paypal?

whippedchaos
03-13-2006, 03:11 PM
The carb is in good shape and should not need to be rebuilt or anything but being that it is almost 20 years old i was going to rebuild it. I do take paypal

whippedchaos
03-13-2006, 03:12 PM
I also have an FMF fatty pipe that i will sell for 30.00 and i have a powercore silencer that has been cut short that needs to be repacked. I did not cut it they guy i bought the quad from did and he told me that it needed to be repacked

whippedchaos
03-13-2006, 03:17 PM
Sale pending on motor

whippedchaos
03-14-2006, 12:46 PM
Motor is sold

300ex03_619
12-18-2006, 03:39 PM
motor, and pipe for 300?

yfz450inMI
12-18-2006, 07:08 PM
Originally posted by 300ex03_619
motor, and pipe for 300?


Originally posted by whippedchaos
Motor is sold

I think it's pretty safe to assume the motor is sold.