Help with a-arms

[blake_mx_racer]

How do i get the a-arms to come off the spindles. Mine are locked up on there and wont come off. Need some help fast. Thanks in advance

[czrider263]

Honda makes a tool just for that. i got mine off with a rubber hammer.

[300ex_#387]

Take your crown nuts, and flip them and put them on untill they are flush with the threads. Then hit them with a happer while pulling up on the a arm.

Originally posted by 300ex_#387
Take your crown nuts, and flip them and put them on untill they are flush with the threads. Then hit them with a happer while pulling up on the a arm.


just put a little elbow greese

[eganracing]

pickle fork does the trick:D

[khen]

I just remove the castle nuts and leave the arms attached to the quad, roll up a towel and wrap it around the arm(to the inside of the ball joint) and give it a good smack with a hammer.

[tucson450r]

Motion Pro makes a ball joint separator that is $20 or so and will not damage threads or boots. It is available on ebay, Rocky Mountain ATV and most atv shops.