Valve Adjustment ?'s

[E400X]

How much "slack" is there on the rockers when the motor is on the compression stroke? I went to adjust my valves for the first time yesterday but when i would pull up on the rocker to check for slack the rockers would just very barely move. I am pretty sure it was on the compression stroke because I turned the flywheel counter-clockwise untill I saw the intake valves rockers go down(open) and come back up, then I lined up the T on the flywheel on its next time around. Almost definite i was on the compression stroke but I wasn't getting to much movement at all from the rockers so i figered I would post to find out just how much "slack" there such be before I go any further. Thanks for the help

[TRX250EXER]

sounds like your fine. But to make sure go one more rotation and see if there is anymore slack. But you should be right. sounds like you did it exactly right.

[E400X]

Thanks TRX, I thought i was doing it right, but when you hear the word slack, i expected alittle more movement than i got.