March Madness

[Pappy]

Ok, I am out of ideas for March's special, so I am leaving it up to YOU:eek:


You tell me what you need done, and what you would like to pay and I will see what I can do:cool:

[Chino]

klx 110 frame and sub frame

Trans Green

25 dolla :devil:

[Chino886]

Beadlock rings and wheels.....how much?

[Pappy]

Originally posted by Chino
klx 110 frame and sub frame

Trans Green

25 dolla :devil:

If it is sent stripped, and you cover shipping...can do

[Pappy]

Originally posted by Chino886
Beadlock rings and wheels.....how much?

I usually charge $25 a rim for that, pm me what you think is reasonable

[nowukno]

How about $450 for the HD Burgard arms that cost $530. :devious:

[Pappy]

haha, well its not so mad that i want to loose money:p

mayeb something along the lines of free shipping:D

[nowukno]

lol , i was j/k. :p The Rossier will do me for now. :D

[bad01300ex]

pc my swinger, a arms, spindles, radiator shrouds (all stealth), and shock springs (not sure) for 175?:chinese:

[Pappy]

Originally posted by bad01300ex
pc my swinger, a arms, spindles, radiator shrouds (all stealth), and shock springs (not sure) for 175?:chinese:

how about $145 shipped:p

[xsr_racing28c]

Let's see.....:rolleyes: ............

Upper lt arms
Motor mounts
clutch cover
valve cover
Kick start lever
rear brake lever
rear dg fat series grab bar
front & rear hubs
brake stay
rear axis spring
burgard beadlock rings

all in trans blue... for .............$155 shipped??

[bad01300ex]

Originally posted by Pappy
how about $145 shipped:p


woa:eek2: if your serious ill ship em out this week!!!

[meangreen400ex]

How much to send and coat the aluminum Rossier can

[Pappy]

Originally posted by bad01300ex
woa:eek2: if your serious ill ship em out this week!!!

are they shipped yet:cool:

[Pappy]

Originally posted by xsr_racing28c
Let's see.....:rolleyes: ............

Upper lt arms
Motor mounts
clutch cover
valve cover
Kick start lever
rear brake lever
rear dg fat series grab bar
front & rear hubs
brake stay
rear axis spring
burgard beadlock rings

all in trans blue... for .............$155 shipped??

Send them:D

[Pappy]

Originally posted by meangreen400ex
How much to send and coat the aluminum Rossier can

if its a bare diassembled can, $15+ $8 s/h

[xsr_racing28c]

Ken, my parts will probably be there the end of next week.. im still in the process of striping the quad down.. they will be there though, i'll send along a note with them, so you know what/who they are for.. Thanks, Jason oh yea.. and can you throw some BK Perf stickers in there?

[hauck400ex]

how about strip and coat a 400ex frame trans red for $150 and i can cover the shipping?? and an hmf pipe for $15

[Pappy]

Originally posted by hauck400ex
how about strip and coat a 400ex frame trans red for $150 and i can cover the shipping?? and an hmf pipe for $15

is it here yet:eek:

[Chino886]

I send you wheels......and they come back with MX tires!!!! :blah:

[hauck400ex]

for real??!! it has a failed paint attempt on it so it needs stripped pretty bad, then trans red... if you are serious im gonna start tearing down my bike tonight!!!

and what all is involved with disassembling an hmf pipe?

[AtvMxRider]

Ken did your neighbor smack you in the head with a fence post:confused:

[hauck400ex]

what?

[AtvMxRider]

Originally posted by hauck400ex
what?

Not you

[Pappy]

Originally posted by hauck400ex
for real??!! it has a failed paint attempt on it so it needs stripped pretty bad, then trans red... if you are serious im gonna start tearing down my bike tonight!!!

and what all is involved with disassembling an hmf pipe?

no problem, start tearing it down


jerry....not at all. i need to get rid of alot of powder stock before warmer weather rolls in, I can only store so much (it doesnt like temps above 80 degrees)


and besides, going full time soon so i need to increase the work load:chinese:

[AtvMxRider]

Originally posted by Pappy
no problem, start tearing it down


jerry....not at all. i need to get rid of alot of powder stock before warmer weather rolls in, I can only store so much (it doesnt like temps above 80 degrees)


and besides, going full time soon so i need to increase the work load:chinese:


I gotcha I thought you might have taken a fence post to the head :devil:

[Pappy]

haha, nope, but i can spring some march madness on him if it arises:devil:

[250-R-250]

Spindles
Hubs
Swingarm
Rear hubs
Shock linkage and dogbone

uh...70?

[Pappy]

Originally posted by 250-R-250
Spindles
Hubs
Swingarm
Rear hubs
Shock linkage and dogbone

uh...70?

$100 shipped is about the best I could do

[JDiablo]

Frame,subframe,lower arms,swinger,sidecases.

A case of beer. :devil:

[Pappy]

Originally posted by JDiablo
Frame,subframe,lower arms,swinger,sidecases.

A case of beer. :devil:

My brother already cashed that deal in:p

[JDiablo]

Ok then how about two cases :devil:

[2001300exguy]

400ex frame and sub in trans red for 150 + shipping?:confused:

[Pappy]

Originally posted by 2001300exguy
400ex frame and sub in trans red for 150 + shipping?:confused:

send it

[bad01300ex]

Ok pappy how bout this......

Repair/PC swinger
PC a arms
PC shrouds
PC tripple rate front/dual rate rear springs
PC spindles/moly shafts
PC Hinson 250r clutch cover (currently purple:confused: )

Moly coat about 70 (give or take) bolts, including motor mount bolts, engine case bolts, and various other frame bolts (some of which have already began to rust/corrode, not sure if you can still do those??)

Moly around 25 (give or take) nuts.

And my frame/sub (which you already have)

for $500 shipped:macho

[heatherbee923]

sounds like your taking a huge loss on alot of this work:confused:

[Sjorge450R]

Hows $17 to moly coat a set of sprockets?

[Pappy]

Originally posted by bad01300ex
Ok pappy how bout this......

Repair/PC swinger
PC a arms
PC shrouds
PC tripple rate front/dual rate rear springs
PC spindles/moly shafts
PC Hinson 250r clutch cover (currently purple:confused: )

Moly coat about 70 (give or take) bolts, including motor mount bolts, engine case bolts, and various other frame bolts (some of which have already began to rust/corrode, not sure if you can still do those??)

Moly around 25 (give or take) nuts.

And my frame/sub (which you already have)

for $500 shipped:macho

sounds about right, send it

heatherbee923
i usually charge $175 for a frame so $150 is not a huge loss;) if someone wants a color im not trying to use up i doubt i could move much lower then my normal $175. solid colors i can work with this month, and the red everyone seems to like, but other translucent colors will not be price cut:p and now that i have increased the size and capacity of what work i can do, it actually benefits me to have more parts to work thru in a batch then it does to only have a few.

[Pappy]

Originally posted by Sjorge300EX
Hows $17 to moly coat a set of sprockets?

you still have the address:confused:

[Sjorge450R]

Originally posted by Pappy
you still have the address:confused:

never did, C&D sent the heat shield to you. Will that include shipping? PM me the address and I will get these sent out after my race sunday. They can fairly new right? Do you have like a red moly coat? Would I get them back in time for a race on the 26?

Also can they be steel?



BK Performance
84 Chase Lane
Hedgesville WV
25427


usually takes just a night or so to do them, and yes, i have red but IMO its more for parts that will not see the abuse sprockets do. the moly black and the grey work the best

[PismoLocal]

How about all four hubs on a 400ex trans blue for $60?

[redrunner]

Oh man now your just tempting me to tear it down again....:mad:

[Pappy]

Originally posted by PismoLocal
How about all four hubs on a 400ex trans blue for $60?

send them

[Pappy]

Originally posted by redrunner
Oh man now your just tempting me to tear it down again....:mad:

I always hook you up so dont be tearing down unless you need to:p

[Sjorge450R]

thanks, it might not be until the end of march after my race on the 26 since I need axle bearings and clutch cable.....:(. At first I thought you forgot about my post and I scanned through the page and was like "Woah."

[2001300exguy]

youve got another pm pappy

[Pappy]

Originally posted by Sjorge300EX
At first I thought you forgot about my post and I scanned through the page and was like "Woah."

LOL....i was like...WTH did my post go:mad: then i realized i hit edit instead of reply:p

[fast250r]

Pappy you have a PM.

[journeyman]

did you already give me the special price for my subframe???

[Pappy]

Originally posted by journeyman
did you already give me the special price for my subframe???

yep, i think most will find my prices are pretty much as low as i can make them.



as i stated earlier, on certain colors im flexing some this month. if it becomes an issue i can just delete this thread:p

[2001300exguy]

did you get my pm about the grab bar pappy

[Pappy]

Originally posted by 2001300exguy
did you get my pm about the grab bar pappy

hard to say from pics, ill do what i can

[2001300exguy]

ok thanks alot, im gonna try and send it out friday. cashiers chech for $185 with it?

[450robot]

you can get pro-armor right? how about some nerfs and the xc pro bumper

and then coat them in stealth black?

i dunno how much they run, so if you can give me any kind of deal, its awsome

and im sending those arms on friday :) thanks again pap

[BigBoreDinosaur]

Here's an odd one... set of 4 16" Chevy truck wheels.. would be shipped blasted to bare metal. Any idea on a cost to PC in a "chrome-like" color? How about plain silver?

[bad01300ex]

Originally posted by Pappy
sounds about right, send it


It will be on its way tomorrow........

[Chino886]

Hey Pappy,

I just wanted to thank you for your generosity running this special, obviously it is a hit, 4 pages long in only 2 days! I will not be able to send them beadlocks and rings to you though, I just had to buck up for an axle lock nut, ended up going with an anti-fade so it hurt the pocket book a little.

Keep up the good work!

[Pappy]

Originally posted by 450robot
you can get pro-armor right? how about some nerfs and the xc pro bumper

and then coat them in stealth black?

i dunno how much they run, so if you can give me any kind of deal, its awsome

and im sending those arms on friday :) thanks again pap

The prices are the same as on Pro Armors webpage, with the exception that I will PC the parts at no charge if purchased thru me. www.proarmor.com

[Pappy]

Originally posted by BigBoreDinosaur
Here's an odd one... set of 4 16" Chevy truck wheels.. would be shipped blasted to bare metal. Any idea on a cost to PC in a "chrome-like" color? How about plain silver?

Truck rims would run around $40 each for chrome with clear

[Pappy]

Originally posted by Moto49X
oh no pappy, i dont have anything left to PC....:(

LOL, I think you got connected pretty good on your rebuild, so I wouldnt worry:D

You can always build another one:eek:

[Pappy]

Originally posted by Chino886
Hey Pappy,

I just wanted to thank you for your generosity running this special, obviously it is a hit, 4 pages long in only 2 days! I will not be able to send them beadlocks and rings to you though, I just had to buck up for an axle lock nut, ended up going with an anti-fade so it hurt the pocket book a little.

Keep up the good work!

If you need them done send them, pay me when you can. You have sent enough work that I can do them so your project gets done like you want it.

[Chino886]

Originally posted by Pappy
If you need them done send them, pay me when you can. You have sent enough work that I can do them so your project gets done like you want it.

Thanks! But I think I just sold some parts to pay for some PC! :D

I'll let you know when I send them!

[PismoLocal]

Hubs sent

[Pappy]

Pit bike frame and swinger would be like $85-100

[fast250r]

How much for a frame, hubs, and upper a-arms in shimmering candy blue. Lower a-arms and swinger in super mirror black.

[FBRacing76]

How much for 400ex Side Cases Silver Vein, and Spindles in Stealth Black with molycoated shafts. Let me know! Thanks

[Pappy]

Originally posted by fast250r
How much for a frame, hubs, and upper a-arms in shimmering candy blue. Lower a-arms and swinger in super mirror black.

i answered your pm

[Pappy]

Originally posted by FBRacing76
How much for 400ex Side Cases Silver Vein, and Spindles in Stealth Black with molycoated shafts. Let me know! Thanks

$30 a side with clearcoat

$20 per spindle

[450 Racer R]

Hey pappy, I have three frames I need to have done. two 450r frames and a 400ex frame. the 400 is a surprise for my dad and the 450r frames are for me and my brother. All three are stripped and gussets have been welded in already. would you do 150 a piece? let me know!

[Pappy]

sounds good, just send the color list along with the serial numbers so i dont get them mixed up:p

[450 Racer R]

alright cool, I'll let you know when I send them out.

[250RXCrider]

Pappy,

How about a super;) deal on rear burgard beadlocks powder coated black and hell through in a price for 4.1 fronts.

-James

[250-R-250]

Pappy can you do Cases? Id appreciate it if you gave me an estimate on 250R cases.

[Pappy]

Originally posted by 250RXCrider
Pappy,

How about a super;) deal on rear burgard beadlocks powder coated black and hell through in a price for 4.1 fronts.

-James

I will place to order:D

[Pappy]

Originally posted by 250-R-250
Pappy can you do Cases? Id appreciate it if you gave me an estimate on 250R cases.

center cases run around $40 each for a solid color only

[250-R-250]

Alright, You will be seeing some parts from me as soon as I get the bearings out. It might be a week because I gotta find an offen to get them out lol. You said that in order to get the march madness deal we could only use certain colors. What colors can we use? Also I was hoping to do the cases polished and then a clear coad flake. Do you polish? I could do them as best I could if you dont.

[Pappy]

between you and me, if you have them polished just have them clear laquered. you can do it yourself and it will save ya some money:D

[250-R-250]

Alright, what do you mean by laquered? I am going to be sending you some parts, maybe the cases too idk?

I will be sending

Front hubs and spindles
rear motor mount
Swingarm
and some other little peices

[Pappy]

Laquer, its a type of paint.

Actually Zoop Seal works insane on polished parts as a sealer.


Ill be here, just let me know what and when your sending

[project R]

Hey pappy, how bout nerfs and beadlock rims in satin black and hubs in a red color to match lakers along with top a arms the same color? Also how much for gun metal flywheel cover, clutch cover, and valve cover?

Actually, you know what, heres my quad as it sits now, I had this done over a year ago, but I'm thinking about spicing it up a bit. Do you have any recomendations? LEt me know, I'd like the opinion of a professional. :D

http://img.photobucket.com/albums/v227/04yfz/Clean%20Yfz/yfz11.jpg
http://img.photobucket.com/albums/v227/04yfz/Clean%20Yfz/yfz4.jpg
http://img.photobucket.com/albums/v227/04yfz/Clean%20Yfz/yfz2.jpg

[Pappy]

looks pretty good from where im sitting:p


nerfs are $55 a set
beadlocks are $25 ea
upper arms would be $25
the covers would run $10 each of all the parts were sent at once


i usually get accused of going overboard, but I am a firm believer in detail work that sets you apart from someone who just springs to get the frame done!

[Pappy]

on my personal quads, detail has a whole new meaning:D

[Pappy]

i reckon you dont have to go this far, but wtf:cool:

[Pappy]

Like my moto states....


"Where Badazz Begins":bandit:

[250RXCrider]

Originally posted by Pappy
I will place to order:D

9 inch rears 10 inch fronts 4:1 offset, you know what us XC guys want:D

[Pappy]

No problem James, 4-1s are hard to get ahold of but I have a few sets on order so I will get first pick when they are completed!

[dkeen73]

Can you help me out with some parts? Can you do some pro-peg nerfs and pro armour (bull horn) bumper in stealth black for 50.00 let me know....thanks

[Pappy]

as long as you clean the nerfs extremely well before shipment. i dont mind prepping them for pc, but washing the grime off of them is not my thing:p

return shipping will be roughly $15-$18