Buffalo400
03-03-2006, 02:59 PM
Hi
I put a 450r carb in my 400ex (stock, with hotcams stage 2, open box).
My jetting is not perfect but arond 8/10.....
my setup is
-48 pilot, 3,5 turn out....
-3rd notch from up
-158 main jet
the bike pull hard trough the gears.... Also, I love this choke, the bike start better than the crappy 400ex choke.....
My idle is fine.... but when i push on the throttle JUST A LITTLE but quickly (The needle is still down), the bike shut down...
What do you think? i think my pilot is too small, I'm going with a 50 pilot jet....
thanks!
I put a 450r carb in my 400ex (stock, with hotcams stage 2, open box).
My jetting is not perfect but arond 8/10.....
my setup is
-48 pilot, 3,5 turn out....
-3rd notch from up
-158 main jet
the bike pull hard trough the gears.... Also, I love this choke, the bike start better than the crappy 400ex choke.....
My idle is fine.... but when i push on the throttle JUST A LITTLE but quickly (The needle is still down), the bike shut down...
What do you think? i think my pilot is too small, I'm going with a 50 pilot jet....
thanks!