quadridermx
03-02-2006, 06:42 PM
Few things up for sale that I got as spares with a past 250r. Time to clean out the attic...
1) Rear 10" ITP Beadlocks with 18x11x10 Holeshots. Both holeshots almost new, but one has a nice gouge in the side and will not hold air. Good tube candidate!
http://www.imagestation.com/picture/sraid201/p193567cc26db8c90bec7f5e6bd316b61/eff9a001.jpg
Insides of the beadlocks are bent up a little, but it's ONLY the very outer edge. The part where it actually seals is still perfectly round. Edge could be bent back easily.
http://www.imagestation.com/picture/sraid201/pb2ef985e35b72018708cef686725267e/eff99fe9.jpg
2) Front 20.5x7x10 Hoosier tires mounted on stock reversed (give about an extra 3 inches width) Honda rims.
http://www.imagestation.com/picture/sraid201/p9a3f3ff9630585559910df2e080a55f1/eff99fbf.jpg
http://www.imagestation.com/picture/sraid201/p522fd2cfa36ab50d1358d744c9674a6f/eff99fc0.jpg
3) Azonic "Double Cross" tapered handlebars
http://www.imagestation.com/picture/sraid201/p4e9582bcd96363dfcc918dc14f42f4d3/eff9a047.jpg
http://www.imagestation.com/picture/sraid201/pc235bdc1af33aeb8c245574d268dba30/eff9a050.jpg
4) 250r FMF Fatty Pipe w/ Power Core II Silencer. Pipe could use a polishing, and has a couple dents, but would make a great spare. Silencer definitely useable and looks great when cleaned up.
http://www.imagestation.com/picture/sraid201/pa27fd703970739bc347ee756fed34bc0/eff9a051.jpg
http://www.imagestation.com/picture/sraid201/p829b38f71f1df9cf3e6a0b390e5f6735/eff9a005.jpg
5) 250r swingarm. Was told 86-87, but I think all years are interchangeable. Could use a good cleaning and PC or paint job, but VERY sturdy. Is machined to accept 2 OEM Honda bearings instead of the normal 1 bearing setup. I've been told this is an excellent setup that's very reliable.
http://www.imagestation.com/picture/sraid201/pf939be6657adc54798b9eae3c3b580c5/eff9a03e.jpg
I also have an extra front rim and tire, and an axle (+2 I think) with messed up outer threads I'll throw in. Don't currently have pictures though...
All parts for $250 OBO! :scared: The beadlocks alone sell for that, granted brand new, but you get the point...
Price does not include shipping. Therefore, local pickup in Temperance, Michigan is welcomed, as shipping all these parts may be a little pricey.
Or, if you want an individual part, make me a REASONABLE offer and it's yours. I'm not looking to get top dollar for this stuff, but please no "I'll give you $10 including shipping" offers.
1) Rear 10" ITP Beadlocks with 18x11x10 Holeshots. Both holeshots almost new, but one has a nice gouge in the side and will not hold air. Good tube candidate!
http://www.imagestation.com/picture/sraid201/p193567cc26db8c90bec7f5e6bd316b61/eff9a001.jpg
Insides of the beadlocks are bent up a little, but it's ONLY the very outer edge. The part where it actually seals is still perfectly round. Edge could be bent back easily.
http://www.imagestation.com/picture/sraid201/pb2ef985e35b72018708cef686725267e/eff99fe9.jpg
2) Front 20.5x7x10 Hoosier tires mounted on stock reversed (give about an extra 3 inches width) Honda rims.
http://www.imagestation.com/picture/sraid201/p9a3f3ff9630585559910df2e080a55f1/eff99fbf.jpg
http://www.imagestation.com/picture/sraid201/p522fd2cfa36ab50d1358d744c9674a6f/eff99fc0.jpg
3) Azonic "Double Cross" tapered handlebars
http://www.imagestation.com/picture/sraid201/p4e9582bcd96363dfcc918dc14f42f4d3/eff9a047.jpg
http://www.imagestation.com/picture/sraid201/pc235bdc1af33aeb8c245574d268dba30/eff9a050.jpg
4) 250r FMF Fatty Pipe w/ Power Core II Silencer. Pipe could use a polishing, and has a couple dents, but would make a great spare. Silencer definitely useable and looks great when cleaned up.
http://www.imagestation.com/picture/sraid201/pa27fd703970739bc347ee756fed34bc0/eff9a051.jpg
http://www.imagestation.com/picture/sraid201/p829b38f71f1df9cf3e6a0b390e5f6735/eff9a005.jpg
5) 250r swingarm. Was told 86-87, but I think all years are interchangeable. Could use a good cleaning and PC or paint job, but VERY sturdy. Is machined to accept 2 OEM Honda bearings instead of the normal 1 bearing setup. I've been told this is an excellent setup that's very reliable.
http://www.imagestation.com/picture/sraid201/pf939be6657adc54798b9eae3c3b580c5/eff9a03e.jpg
I also have an extra front rim and tire, and an axle (+2 I think) with messed up outer threads I'll throw in. Don't currently have pictures though...
All parts for $250 OBO! :scared: The beadlocks alone sell for that, granted brand new, but you get the point...
Price does not include shipping. Therefore, local pickup in Temperance, Michigan is welcomed, as shipping all these parts may be a little pricey.
Or, if you want an individual part, make me a REASONABLE offer and it's yours. I'm not looking to get top dollar for this stuff, but please no "I'll give you $10 including shipping" offers.