PDA

View Full Version : Antifreeze in oil.



lanky3767
03-02-2006, 01:05 PM
I have an 86' TRX 250R and I just rebuilt the bottom end put a new crank in it. I fired in up and decided to change the oil just incase there was anything left in it and the oil was green and thind out I an guessing that the water pump seal is leaking. Has any one ran into this?

XCredrider
03-02-2006, 02:25 PM
ive been there before. That is what i assume it would be.

dsaint77
03-02-2006, 03:26 PM
after changing the oil, ride it a tank of gas keeping an eye on your coolant and then change the oil. if there is coolant in it. you need to replace the mechanical seal.

matt250r21
03-02-2006, 04:25 PM
you will also have to replace the oil seal behind the mechanical seal and possible the water pump ball bearing.