parts eeter
03-02-2006, 09:49 AM
I removed the valves from the head and they are really corroded,but are tight in the guides and show good pattern on the seats.The oem valves will cost about 100.00 bux to replace.
Is there a good alternative thru the aftermarket for a superior valve set??Or would you say that a good cleaning and relap would be sufficient.The quad ran fine before but had oil issues cuz the rings were wore out.It started fine and ran awesome and idled well.Should I just clean and relap my original valves,and put new seals in??Or buy oem or aftermarket valves and install with new seals.The original seals were definitely hardened and cooked.Thanks guys!!:D
Is there a good alternative thru the aftermarket for a superior valve set??Or would you say that a good cleaning and relap would be sufficient.The quad ran fine before but had oil issues cuz the rings were wore out.It started fine and ran awesome and idled well.Should I just clean and relap my original valves,and put new seals in??Or buy oem or aftermarket valves and install with new seals.The original seals were definitely hardened and cooked.Thanks guys!!:D