bar risers

[coolex]

is there any way to raise my handle bars because i have a 2003 250ex and im getting to tall for it and i cnt get a new quad to i need the handle bars to be higher up and i cannot find a taller sterring stem for a 250ex so i was wondering do the sell bar risers like they do for snow mobiles and i have the stock handle bars

[MossboysRacing]

"Rox" risers... they make block risers, anti vibe risers,and all kinds of stuff that can help. speedfx.com is there web site.

[coolex]

thanx but will it work for four wheelers to basically im asking if the have the same size bar i thinks its 7/8 but thanks thats a big help

[ontarioracer#33]

yes they both are the same size bar. what i did when i got to tall for my 300ex is i had a profesional welder cut my stock stem and weld in an extra inch. you might also want to try a different bar bend find a taller one or one with less sweep in it. also before you go wild raiseing your bars make sure that you have enough cable to do so.

[MossboysRacing]

Rox makes risers just for Quads also...you can go 2 inches taller, 7/8 to 7/8 or 2 inches taller 7/8 to 1 1/8 they have all kinds of stuff for quads... check them out, you will not be disappointed.
I run a 2 inch riser on my 250x, and it allows me to move the bars up and foward. On a stock clamp, you can only rotate the bars.
:cool:

[gotwarrior]

has anyone tried the anti vibe risers.. I wondering if they were worth the money or not..

[TWISTED DINLI]

just get a 450r and you will solve everything.:D