300cc Duncan Racing Eliminator 4 250R

[s2k1]

I have a 300cc Duncan Racing "Eliminator" non power valve cylinder for sale. It is used but needs nothing. It was removed from a bike I bought from Duncan Racing several years ago and replaced with a 265 power valve top-end. The bike supposedly was Travis Spader's.
The cylinder comes with a Duncan Racing Powerhead, Wiseco piston and rings, stock 250R exhaust spigot, VFORCE reed assy, and stock 250R intake manifold.
I have not measured the cylinder and piston for clearance but the bike ran awesome and made no noise.
The cylinder has some engraved numbers under the reed cage area that identify the cylinder. If interested, PM me for the numbers. Duncan Racing can probably provide more info.
The bike pulled very hard from mid to top.
$475 shipped.

[screaminta]

could you send me a pic of the setup and also the numbers that are on it? Lastly, is the price negotiable? email

Goinpazo4@aol.com

[skyhigh716]

could you also send me some pics of the motor and the numbers that sre on the motor to fatlr9@aol.com

Dustin

[s2k1]

Will send info from cylinder tomorrow...

[s2k1]

Bottom of the reed cage area says:
KEEN PT6971
6/99

FYI, This motor was also running a PWK 39 carb and a Paul Turner pipe.
This cylinder is fully ported by Duncan Racing.