350x gearing

[2muchquad]

anybody running a 350x rear end?im talking axle,swinger carrier etc.heres my situation,i currently have the stock 40t sprocket for it and i can only find 40,41 and 42t sprockets for it.im running a 14t now on the 300ex motor but im still geared too low.anybody know or have a 36 or 37t sprocket for a 350x? right now its too low with the 20in tires on,once i put my 18in moto x tires on its really gonna be a creeper:( will a 300ex sprocket fit a 350x axle?i would hate to go with a 300ex axle just for gearing options,plus i would need to buy aftermarket because the 350x axle is 2in wider.:(

[bwamos]

I havent checked it. but have you checked to see if perhaps the 300ex sprocket hub will fit on the 350x axle? Probably a mismatch, but you never know.

I have no experience with the 350x rear end.. sorry.

[2muchquad]

i thought the sprocket hubs were pressed on?i would imagine they would fit but how in the hell would they come off:(

[bwamos]

You're probabyl right. Been a long time since I've looked at a stock axle. I have an aftermarke axle.. the sprocket hub is held on with retainer clips.

[MossboysRacing]

Specality sprockets is the only company that I have found that can help with the 350x rear gear. They are about $75.00, but they will last you a while. you can also order it in any tooth you want.

[dork]

rebel sprockets will make you one, i put a 39 on my friends 350x trike. its aluminum and cost about $40. sidewinder has them too but they're big $.