Rear brake pads TRX 90 Sportrax

[yellow400exwb]

I'm trying to change the rear brake pads on my sons 2002 TRX 90 and I can't get the drum off. I have taken the little wing nuts off the adjuster to release pressure to the drum. I have taken the 2 big axle nuts off and the cover over the drum, but now I'm stuck. I can't get the drum off. Please help.
Thanks in advance for any help :confused:

[Rip_Tear]

I had a similar situation with my 300trx, I had to use a gear puller, and I made extensions for it to reach. Much older quad, and it was totalled no brake on there now, but that might be an option for you?

[pteknique]

Make sure you loosen up the wing nuts on the brake cable all the way. Then if it still want come off lightly tap on it with a hammer. Should come right off then.

[yellow400exwb]

I got it, Finally. There was an O-ring between the axle and drum holding it on. After I took the o ring out I had to tap the drum loose with a screw driver and hammer. Thanks for the help:)