PDA

View Full Version : Wanted:Motor for 2001 400ex



Jacob873
02-23-2006, 09:33 PM
I am looking for a strong running motor for a 2001 400ex. stock or modified, let me know what you have. thanks

BlackTrx440ex
02-24-2006, 07:10 AM
how much will you give me for it? i got a wiseco big bore 440 in it 12;5;1 runs perfect barnetts clutch and hott cam stage 1

jstory
02-24-2006, 09:03 AM
This is a duncan 440 motor that has about 4 hrs of ride time on it since duncan freshened it up. It originally had $2500 spent on it which included the exhaust and carb, so you can figure they did about $1500 worth of motor work( cam, valves, hardface rockers, head work, sleeve and piston). Then it was sent back to them after one season of races on it and they freshened it up for $540(bore, new piston, new valves, and a complete valve job). Will take a $1000 for the motor.

partyboy300ex
02-24-2006, 10:05 AM
I have a JE 426ex motor with 8 hours oF porting and polishing JE 11:1 piston Hot Cams stage 2 Hardend Rockers larger Titiamium Valves and springs Barnett Clutch larger head studs and it come with a stock carb all wiring and oil tank and cooler this is everything you need for a motor beside pipe.

Jacob873
02-24-2006, 08:04 PM
partyboy300ex: tried to pm you but your inbox was full, let me know when emptied, or another way to get ahold of you

partyboy300ex
02-24-2006, 09:20 PM
PM box is emptyed.

brandon34r
02-24-2006, 11:42 PM
426 wiseco kit
12.5/1 piston
stage 2 hotcams
ported
hinson clutch basket
barnett clutches
cometic gaskets
titanium valves

$900 comes with carb and starter

very fast and strong running.I could pass my 450r when it was stock with this motor

have a white bros e-series I could throw in for an extra 100.


stock oil tank powdercoated prismo blue and oil cooler are included

Old Head
02-25-2006, 03:59 AM
Hey partyboy what head pipe is that? The bend on it is really tight, never seen one that far away from the oil tank.

theTman
02-25-2006, 07:05 PM
Originally posted by Old Head
Hey partyboy what head pipe is that? The bend on it is really tight, never seen one that far away from the oil tank.

stock

ThorRacing37
02-25-2006, 09:10 PM
Originally posted by brandon34r
426 wiseco kit
12.5/1 piston
stage 2 hotcams
ported
hinson clutch basket
barnett clutches
cometic gaskets
titanium valves

$900 comes with carb and starter

very fast and strong running.I could pass my 450r when it was stock with this motor

have a white bros e-series I could throw in for an extra 100.


stock oil tank powdercoated prismo blue and oil cooler are included




reallly good seller...!!!

partyboy300ex
02-26-2006, 09:50 AM
Originally posted by Old Head
Hey partyboy what head pipe is that? The bend on it is really tight, never seen one that far away from the oil tank.

Its a Sparks X-4 not stock;)

02-27-2006, 07:13 AM
2002 400ex motor 550 shipped
stock with diffrnt clutch
30 hours on rebuild and 25 on after valves ajusted
getdrunk1990@yahoo.com
or pm me